Norm Faux Wood Woodcore Composite Shutters

Build Your Shutter Here

(Click on a sample image to view larger)

Specify your measurements

Width:

Height:

Louver Size

Cafe Style/Double Hung
Cafe style means that the shutter is shorter than the window height and finished at the top. Double Hung means that you are ordering 2 separate shutters for the same window. The top has its own set of hinges and the bottom also has their own separate hinges.

Center Stile Options
Butt style is only used for a single panel configuration. Rabbet is used most often for split panels but the window must be square or light will pass through the center. Astragal is the default stile as it can hide many out of square window problems
View Stile Options

View Option Samples

Divider Rail
A divider rail is used to add support to a shutter panel, any shutter over 78 inches has to have one. The customer must tell us in the order comment box where they want the divider rail from the bottom to center of the panel.
View Divider Rail

View Option Samples

Frame Buildout
Frames can be made thicker to accommodate a larger vane width.

Hidden Tilt Option
Norman offers visible tilt bar in center at no charge. Hidden tilt is a built in tilt where you simply lift and lower the louvers with no visible bar. This also keeps a more open view.

Hinge Color (Stainless Steel Only for Waterproof Shutters)

Mount

Mounting Frames
Mounting frames are used at times when you have no molding to mount the shutter to. Z frames are very helpful when mounting to a dry wall trimmed window frame. If a Z frame is too much trim, then a mounting strip is a good choice. This gives you flexibility for that stubborn, out of square window. Many customers like to mount their shutter directly to the molding. L frames are for outside or inside mount. For an outside mount L frame, you will place the "L" frame at the edge of the window opening. The shutter will be approx. 3" wider than ordered shutter width from frame to frame of outside edge. For an inside mount L frame, you will deduct 1/8" to fit max frame to frame outside.
View Norman Frames and Sill Options

View Option Samples

Panel Configuration
Shutters are made with either a single panel or multiple panel configuration. Each panel is the "swinging door" of the shutter.
View Shutter Hinge Configuration

View Option Samples

Pre-Drill Frame
Norman will pre-drill your mounting frame, if available

Room

Shutter Location

Tilting Control Option

Special Instructions & Notes

Installation Instructions: Click here

Woodcore
EcoSmart Engineered Wood Shutters

As a busy homeowner, you expect innovative products that retain their functionality and good looks without excessive maintenance. Woodcore shutters are constructed with a solid MDF core, real wood in an advanced state, for incredible density and strength. Made from the wood of rapid-growth trees, Woodcore shutters enable tree replenishment at an extremely accelerated rate.

In addition, Woodcore's UV inhibitors are essentially lead free, does not release any volatile organic compound and protects against color fading and/or yellowing. The patented polypropylene coating resists staining to ensure long-term performance in a variety of environments. Woodcore is the natural choice of shutter for your windows.

Built around the concept of modern convenience, Woodcore is made of composite wood harvested from well managed forests and finished with a polypropylene coating that prevents moisture absorption and allows for easy stain removal. It resists cupping, warping and twisting.
Reinforced engineered stiles: stile core durability reinforced with multiple layers of wood bonded together. The result is a robust support system for shutter panels.
Stainless steel staples resist corrosion and withstand extreme heat.
Better than vinyl or PVC shutters and can withstand even the highest desert temperatures
UV inhibitor protects shutters and home décor from UV rays, prevents color fading and sun damage.
Woodcore's classic painted colors harmonize brilliantly with any décor. The beauty, durability and quality finish of Woodcore shutters are reasonably priced.
A wide range of frames with inserts, which keep installation screws out of sight for a clean and decorative look, match any style and preference.
Personalize shutters with special options. Choose from fixed louvers, hidden or offset tilt rods, café styles, bay and corner window shutters
Quick and easy on-site assembly and installation with the pre-installed magnets and hinges, pre-mitered frames and slotted keyholes.
A guarantee of Norm Shutters exemplary quality with a lifetime limited warranty on materials and workmanship.

Measuring:

Measuring for shutters is very critical and many of the same precautions that one would take when ordering a regular blind applies here. For the width, measure in three spots: top, middle and bottom sections of the window opening. Order the narrowest width. For the height, measure in three spots: left, center and right sections of the window. Order the shortest height.

The placement of the shutter inside or outside of the window depends on whether you have trim/molding around your window opening. If your window is just drywall with no molding you can install inside (with a 2 inch louver) utilizing any of the "Z" frames. If your window has trim around it or a sill, it is always best to call our shutter specialist for help when ordering your shutter.

Installation & Helpful YouTube Videos:

Reviews

Add Product Review

Very Very Happy

Appearance

Construction

Installation

Value

Over all Rating

While shopping for a composite shutter, I happened on www.blindsexpress.com and was pleasantly surprised with the price for these Norman Shutters. Locally dealers wanted at least $500 more for the exact same product. The shutter has been installed now for 6 months in our Texas heat, without any change. Very Very pleased with price and quality.Reluctant to buy on line, but not anymore!

Mary r

Norman is the best shutter I have ever ordered and installed

Appearance

Construction

Installation

Value

Over all Rating

I am a shutter installer by trade and I ordered a Norman Woodlore Shutter for one of my customers down here. It arrived in 4 weeks and was practically fully assembled. It took me 15 minutes to level and install. The customer was extremely happy as I was with the quality and we have ordered 5 more from www.blindsexpress.com.

Max J

Looks awesome

Appearance

Construction

Installation

Value

Over all Rating

The shutters we purchased look great. Prices were good and quality was superb. Installation was pretty easy, so thanks for all the great service.

Tony F

Regular Price:

$0.00

Sales Price

$0.00

Quantity:

Subtotal:

$0.00

Summary:

Slat-Vane Color

Measurements

Width: 24 inches
Height: 36 inches

Norm Faux Wood Woodcore Composite Shutters

Build Your Shutter Here

(Click on a sample image to view larger)

Specify your measurements

Louver Size

Cafe Style/Double Hung Cafe style means that the shutter is shorter than the window height and finished at the top. Double Hung means that you are ordering 2 separate shutters for the same window. The top has its own set of hinges and the bottom also has their own separate hinges.

Divider Rail A divider rail is used to add support to a shutter panel, any shutter over 78 inches has to have one. The customer must tell us in the order comment box where they want the divider rail from the bottom to center of the panel. View Divider Rail × View Option Samples

Frame Buildout Frames can be made thicker to accommodate a larger vane width.

Hidden Tilt Option Norman offers visible tilt bar in center at no charge. Hidden tilt is a built in tilt where you simply lift and lower the louvers with no visible bar. This also keeps a more open view.

Hinge Color (Stainless Steel Only for Waterproof Shutters)

Mount

Panel Configuration Shutters are made with either a single panel or multiple panel configuration. Each panel is the "swinging door" of the shutter. View Shutter Hinge Configuration × View Option Samples

Pre-Drill Frame Norman will pre-drill your mounting frame, if available

Room

Shutter Location

Tilting Control Option

Special Instructions & Notes

Reviews

Summary:

Slat-Vane Color

Measurements

Louver Size

Cafe Style/Double Hung

Center Stile Options

Divider Rail

Frame Buildout

Hidden Tilt Option

Hinge Color (Stainless Steel Only for Waterproof Shutters)

Mount

Mounting Frames

Panel Configuration

Pre-Drill Frame

Room

Shutter Location

Tilting Control Option

Cafe Style/Double Hung
Cafe style means that the shutter is shorter than the window height and finished at the top. Double Hung means that you are ordering 2 separate shutters for the same window. The top has its own set of hinges and the bottom also has their own separate hinges.

Divider Rail
A divider rail is used to add support to a shutter panel, any shutter over 78 inches has to have one. The customer must tell us in the order comment box where they want the divider rail from the bottom to center of the panel.
View Divider Rail

View Option Samples

Frame Buildout
Frames can be made thicker to accommodate a larger vane width.

Hidden Tilt Option
Norman offers visible tilt bar in center at no charge. Hidden tilt is a built in tilt where you simply lift and lower the louvers with no visible bar. This also keeps a more open view.

Panel Configuration
Shutters are made with either a single panel or multiple panel configuration. Each panel is the "swinging door" of the shutter.
View Shutter Hinge Configuration

View Option Samples

Pre-Drill Frame
Norman will pre-drill your mounting frame, if available