Our Brand Budget Rockport 3/4 inch single cell

Build Your Blind Here

(Click on a sample image to view larger)

Specify your measurements

Width:

Height:

Cordless Wand Pole

Motorization Charger must be added to your order for motorization

Wi-Fi Controller

Remote Control must be ordered with motorization(unless previously ordered)
Motorized lift system utilizes the the Somfy Radio Technology Somfy (RTS) system. The motors will fully operate the shades with radio frequency technology. RTS1 remote- will operate all of the shades at the same time on the same channel. This cannot be changed later. RTS 5 can operate up to five shadings individually or 4 shades and 1 group control of shades . If you want more than 5 individually controlled shades you must request and be charged for 2 remotes with different channels.

Solar Charger
Solar charger will give a trickle charge and maintain the rechargeable battery in your motorized shade for years without plugging in your DC charger.

Control Mechanism
These blinds can have a standard right left control or cordless or cordless top down bottom up. For large blinds they can have cord loop gear drive.
View Control Options

View Option Samples

Hold Downs
Hold Down Brakets are meant for holding down the bottom rails so that the blind doesnt bang on the door after mounting.

Label Blind by Room

Mount Options
Inside Mount manufacturers will take .3/8 deduction from this measurement. Outside Mount manufacturers will not deduct.

Mounting Spacers
Spacers are needed if you are mounting over a molding and need the bracket to come forward or mounting above the molding and need to make up the difference in molding depth to mount on the wall above the molding.

Upgrade Custom Hardware

Special Instructions & Notes

Our Brand Budget Rockport 3/4 inch Single Cell Light Filtering Collection

Complete Specification Guide - Standard - Motorization - Vertical Cells - Skylights

Rockport Shades feature a patented single honeycomb design that provides the ultimate in energy efficient insulation for your home, while the elegant 3/4" pleat offers a clean, classic look. Rockport Cellular Shades also block 99% of damaging UV rays.
Material Options	Durable polyester cellular fabric with mylar room darkening liner
Finished Shade Sizes	Minimum: 8" x 8" Maximum: 108" x 120"
Color Options	18 Blackout fabric colors
White to the Street	Yes
Operating Systems	Standard cord pull, Continuous cord loop, Cordless, Top Down-Bottom Up, Motorization, Day-Night,
Motorization	No
Privacy & Light Control	High
Energy Efficiency	Best
UV Blocking	Best
Sound Absorption	Yes

Pleat Size: 3/4" single cell

Hardware Options & Operating Systems

You can choose from a variety of Hardware Options, including:

Standard Rectangular (click to define)
Top Down-Bottom Up (Duofold) (click to define)
Continuous Cord Loop (click to define)
Top Down-Bottom Up Continous Cord Loop (Duofold) (click to define)
Cordless Ultra (click to define)
Two on One Head Rail (click to define)
Free Lift and Lock Cordless (click to define)

Break Through Cord Connector for Child Safety

Our Rockport Shades feature the exclusive Break Through Cord Connector. Designed to break apart if a child or pet becomes entangled in the pull cord, the Breakthrough Cord Connector meets all American National Standards Institute (ANSI) and Window Covering Manufacturers Association (WCMA) standards

Non Woven Polyester Fabric
Our cellular fabric is a non woven polyester. You'll benefit from:

UV Protection: nearly 100% of harmful UV rays are blocked
Easy Cleaning: durable, washable, dust resistant, will not fray or fade
Pleat retention: Your shade retains its beautiful look
Color Choices: Choose from a variety of colors and styles
Compact stacking height: The crisp pleats raise to a small, unobtrusive stack
White to the outside: For a neutral street side appearance.

Safety and Style
The Cordless Ultra™ Hardware system operates smoothly without cords, keeping your children and pets safer by completely eliminating the risk of strangulation.

And without the visual distraction of cords, you're left with windows that provide a clean, unobstructed view.

The Cordless Ultra Hardware system achieves all this effortlessly, with only a gentle push or pull needed to raise or lower the shade.

Warranty

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Cellular Blinds

Inside Mount Width

•   Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•   Take the smallest of the three measurements to the nearest 1/8 of an inch.
•   The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•   Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•   Take the largest of the three measurements.

Outside Mount Width

•   Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•   Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•   French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•   Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•   Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•   French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.

Cordless and Cordl loop Installation Instructions

Standard Corded Instaltion Instructions

Reviews

Add Product Review

Blinds

Appearance

Construction

Installation

Value

Over all Rating

Thanks

Greg D

Great blind

Appearance

Construction

Installation

Value

Over all Rating

We love the new blinds. One of the pull strings is a little difficult to get it to release, but they do everything they say and we love how they filter the hot sun.

Cheryl S

Very satisfied

Appearance

Construction

Installation

Value

Over all Rating

First time purchase of top down-bottom up shades and I'm quite happy with them. They were easy to install, look great, and work very well. I plan to order more for other windows in my house.

Carol R

Shade

Appearance

Construction

Installation

Value

Over all Rating

As usual, the shades came in perfect and the fit was exact!

DENISE P

Satisfied

Appearance

Construction

Installation

Value

Over all Rating

Fine fit and finish.

William C

Great blinds!

Appearance

Construction

Installation

Value

Over all Rating

Blinds fit perfectly, are well constructed and look beautiful.

Alyssa C

View All Reviews

Regular Price:

$0.00

Sales Price

$0.00

Quantity:

Subtotal:

$0.00

Summary:

Colors Available

Measurements

Width: 24 inches
Height: 36 inches

Our Brand COM Budget Rockport 3/4 inch Single Cellular Light Filtering

Build Your Blind Here

(Click on a sample image to view larger)

(Click on a sample image to view larger)

Specify your measurements

Cordless Wand Pole

Motorization Charger must be added to your order for motorization

Wi-Fi Controller

Solar Charger Solar charger will give a trickle charge and maintain the rechargeable battery in your motorized shade for years without plugging in your DC charger.

Control Mechanism These blinds can have a standard right left control or cordless or cordless top down bottom up. For large blinds they can have cord loop gear drive. View Control Options × View Option Samples

Hold Downs Hold Down Brakets are meant for holding down the bottom rails so that the blind doesnt bang on the door after mounting.

Label Blind by Room

Mount Options Inside Mount manufacturers will take .3/8 deduction from this measurement. Outside Mount manufacturers will not deduct.

Mounting Spacers Spacers are needed if you are mounting over a molding and need the bracket to come forward or mounting above the molding and need to make up the difference in molding depth to mount on the wall above the molding.

Upgrade Custom Hardware

Special Instructions & Notes

Reviews

Summary:

Colors Available

Measurements

Cordless Wand Pole

Motorization Charger must be added to your order for motorization

Wi-Fi Controller

Remote Control must be ordered with motorization(unless previously ordered)

Solar Charger

Control Mechanism

Hold Downs

Label Blind by Room

Mount Options

Mounting Spacers

Upgrade Custom Hardware

Solar Charger
Solar charger will give a trickle charge and maintain the rechargeable battery in your motorized shade for years without plugging in your DC charger.

Control Mechanism
These blinds can have a standard right left control or cordless or cordless top down bottom up. For large blinds they can have cord loop gear drive.
View Control Options

View Option Samples

Hold Downs
Hold Down Brakets are meant for holding down the bottom rails so that the blind doesnt bang on the door after mounting.

Mount Options
Inside Mount manufacturers will take .3/8 deduction from this measurement. Outside Mount manufacturers will not deduct.

Mounting Spacers
Spacers are needed if you are mounting over a molding and need the bracket to come forward or mounting above the molding and need to make up the difference in molding depth to mount on the wall above the molding.