Our Brand MAR Ready Made 2 inch Cordless Faux Wood

Priced as low as

Based upon a size of 24x36

2" faux wood blinds are made pvc composite material. The slats have a textured look and come in several colors. 2" Cloth tapes are available for accent color if desired. These blinds are warranted to keep their color and prevent warping for as long as our customers own their blind. The working materials for this blind tilt control and lift controls are warranted for existing customer. Cording is warranted for a period of three years, after one year the customer is responsible for shipping to manufacturer for cording replacement.

A new safety standard has been taken into effect limiting the manufacturing of corded blinds in response to fears they could injure or kill children and/or pets by strangulation.
Starting December 15 2018, most products must either be cordless or have shorter, inaccessible cords. Cords will be made 1/3 of the ordered height of the blind, but custom length cords can be requested at the time of order. To avoid order questions, if you need longer cords especially for higher windows, please specify the length controls that will work for you in the order comments box.

Priced as low as

Based upon a size of 24x36

Note: This product comes with the Crown valance free of charge standard. No other valance is available on this product at this time.

Blindsexpress Brand New 2" Cordless Fauxwood !


Trend-right color assortment consists of the most popular printed wood grains and neutrals

Comprehensive easy to sell, easy to install program

Best for Kids certified, ANSI/WCMA safety standard compliant

Smooth operation; simple pull on the bottom rail to lower, to raise guide the blind into the desired locations by gently lifting the bottom rail.

Mariak cordless 2 inch faux



  • Ten colors;  5 printed Realgrain colors, 2 textured and 3 smooth options
  • Durable 1 1/2” x 2” Steel headrail
  • 3 1/4” Decorative Valance—Standard
  • Cordless lift with wand tilt
  • Customized width and height to 1/8” increments


Size Considerations


Cordless Lift Blinds


Cordless Lift Blinds




Minimum (exact)











2" Fauxwood






Depth Requirements for Inside Mount

Blind Type





Partially recessed headrail in window casing/molding




Fully recessed headrail

in window casing/ molding

Headrail Dimensions


Minimum Depth Mount


Flush with Casing (with valance)


2" Fauxwood

1 1/2" x 2"


3 1/2"



  Blind Option                                                                                                                                                               


Blind Option

2" Fauxwood Blinds

Hold Down Brackets

No Charge Option


  Cordless Lift Option                                                                                                                                                                 



  • A safer alternative to accessible cords that are traditionally used to operate window


  • Standard wand tilt eliminates all dangling cords
  • Easy to use: to lower blind, pull on the bottomrail; to raise, simply guide the blind into the desired location by gently lifting the bottomrail
  • Maximum wand length is 48"

Blinds less than or equal to 24" will have a 20" wand

Blinds greater than 24 1/16" will have a 29" wand



2" Fauxwood


Minimum Width


Maximum Width


Minimum Height


Maximum Height



Valance Option



Valance Type


Blind Type

Maximum Continuous Width



Control Type


Return Length



Full Recess Depth


Inside Mount


Outside Mount


3 1/4" Decorative Valance Valance Returns:

1 1/4" Standard Inside Mount

3 1/4" Standard Outside Mount Flush Mount (No returns)

Optional Request








2" Fauxwood






95 1/2"











Cordless lift, wand tilt






3 1/4"







General Information

 Color Assortment                                                                                                                                                                            

All blinds have color coordinated headrail, cord, ladder and wand.


  Text Box: Solid Colors
100 Bright White Smooth
105 Bright White Textured
110 Snow White Smooth
115 Snow White Textured
120 Pearl White Smooth

  Text Box: Realgrain (Printed) Colors
9253 Pecan Realgrain
9256 Chestnut Realgrain
9257 Mahogany Realgrain
9259 Cinnamon Realgrain
9260 Aged Pewter Realgrain

Slat Route and Ladder Count

Finished Blind Width



# of Ladders


# of Lifts

# of Center Brackets

15" to 24"




24 1/16" to 36"




36 1/16" to 48"




48 1/16" to 60"




60 1/16" to 72"



2 over 61"

72 1⁄16" to 84"



3 over 73"

84 1⁄16" to 96"





  1. Maximum spacing between ladders is 12"
  2. Standard control position: Left
  3. Maximum slat width is 96"


  • Classic 1 1⁄2" high x 2" deep



Mounting Brackets

  • Designed for easy and trouble-free installation





Wand Tilt Control

  • Standard feature


Rectangular Bottom rail with End Caps

  • Standard feature




Limited lifetime on:

  • 2" Fauxwood blinds one year on:
  • Internal operating cords

What is Covered

This product is warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that:

1 . The product was properly installed in a residential dwelling;

2 . The product was made or assembled exclusively from Mariak's materials and components;

3 . Mariak’s recommendations were followed with regard to limitations and specifications.

Who is Covered

This warranty extends only to you as the original purchaser of the above stated product .

Blind Option

The obligations of Mariak Industries are limited to the repair or replacement of parts or products found to be defective.

Mariak is not responsible for shipping costs or labor costs, for measuring and taking the product down or for remeasuring or reinstalling the product.

If repairs are made under this warranty, the repairs will be made with like or similar parts.

What the Warranty Does Not Cover

This warranty does not cover conditions or damages caused by abuse, accidents, alterations, misuse or failure to follow instructions for measurement, installation, use, cleaning or maintenance.

Normal wear and tear, including but not limited to the items or occurrences below, is not covered by the warranty:

  • When left for extended periods in direct sunlight, plastics tend to yellow or crack
  • Some loss of color intensity or discoloration may occur in plastic materials or wood finishes when exposed to direct sunlight over long periods of time
  • Colors may vary from lot to lot and may not exactly match samples of previous purchases
  • All cords will eventually wear out

Mariak considers these items and occurrences normal wear and tear and they are not covered by this warranty.


No person is authorized to extend or alter this warranty.


Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.


Warranty claims must be accompanied by the original sales receipt as well as details regarding the nature of the problem, location of the product, etc. To obtain warranty service contact:

Customer Service Center Mariak Industries

575 W . Manville Street, Rancho Dominguez, CA 90220

You may also email or call Customer Service

  Cleaning Instructions                                                                                                                                                                                         

Fauxwood Blinds are easy to keep looking fresh and new for years. Regular dusting with a feather duster is recommended. When necessary, blind can be lightly vacuumed with a brush attachment.

Dry cleaning is not recommended and is not covered by warranty.

Professional blind cleaners use a variety of methods to clean blinds and vary in their capabilities. While Mariak knows that many of our window treatments can be safely cleaned using the appropriate ultrasonic or injection/extraction cleaning methods we cannot guarantee the outcome of any cleaning services provided by an independent company.


9260 Aged Pewter Real Grain View Larger
105 Bright White Texture View Larger
100 Bright White Smooth View Larger
9256Chestnut View Larger
9259 Cinnamon View Larger
9257 Mahogany View Larger
120 Pearl White Smooth View Larger
9253 Pecan View Larger
110 Snow White Smooth View Larger
115 Snow White Texture View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.