Norman Perfect Sheer 2 inch Light Filtering Soft Horizontal

Priced as low as

Based upon a size of 24x36

Experience PerfectSheer?'s soft interplay of light, colors and shadows, and elevate your d├ęcor and privacy control to a new level of elegance and softness. For however you decided to adjust - relax. You can always change your mind.
SUPERIOR LIGHT TRANSITIONS Offering the tightest closure on the market in its category, PerfectSheer? combines a banded layered fabric shade for a sleek and modern effect. Plus a sheer fabric vane shade that creates an elegant louver-link look.
VERSATILITY In a range of on-trend room darkening or light filtering fabrics, and your choice of patterns for sheer, PerfectSheer? is geared for being a stylish solution for almost any room. From completely closed for privacy, to half open on a bright and sunny day, to fully open for radiantly soft and natural light, PerfectSheer? offers total versatility with unforgettable sophistication.

Priced as low as

Based upon a size of 24x36

This is a 2 inch vane when open, completely flat when closed. Please note: This product takes 3-4 weeks normal production and shipping.

blindsexpress shades blinds shutters
Norman Perfect Sheer
Product Infomation and spec quide click here!

Perfect Sheer versitility
Lift Controls  
Continous clutch for Norman perfect sheer Motorized control for perfect sheer
Top Treatments  
Head-rail perfect sheer by Norman Curved facia-Normanperfect sheer
Fabric Facia for Norman Perfect sheer Fabric-facia-window Norman perfect sheer
Wood Valance for Perfect Sheer by Norman Room Scene for Wood valance for Norman Perfect sheer


AA0329 Platinum F1188 View Larger
AA0326 Snowflake F1178 View Larger
AA0326 Lily cream F1179 View Larger
AA0326 Dunes F1180 View Larger
AA0326 Smoke F1181 View Larger
AA0326 Midnight F1182 View Larger
AA0327 Cottonwood F1183 View Larger
AA0327 Cedar Cream F1184 View Larger
AA0327 Quarry F1185 View Larger
AA0328 Soft white F1186 View Larger
AA0328 Cinnamon F1187 View Larger
AA0329 Magnetic Gray F1189 View Larger
AA0329 Cast Iron F1190 View Larger
AA0330 Nightfall F1191 View Larger
AA0330 Granite F1192 View Larger
AA0330 Mineral F1193 View Larger
AA0331 Frost Asphalt F1194 View Larger
AA0331 Frosty Gray F1195 View Larger
AA0331 Frosty White F1196 View Larger
AA0332 Light Gray F1197 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Horizontal Sheers

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an appropriate deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•    French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.

Installation Instructions