Norman essentials Faux wood blinds are a precision cut down program that allows for rapid shipping from Texas directly to our customers.The traditional elegance of faux wood blinds with a proven window blind operating system. The result is classic styling, beautiful elegance and a lifetime of easy operation.This 2.5 inch faux wood comes with a unique "stay put" routeless slat at no additional charge.
A stylish valance completes the look of the Woods Blinds. A trapezoid bottom rail is standard. This is Norman International's Faux Wood collection and they match woodlore shutter colors. Lighter weight and reduced pull force.SPECIAL NEW DESIGN BRACKET ALLOWS FOR 2 INCH INSTALLATION. NOTE:Item always includes mitered valance with two sets of returns: 3/4" and 3 9/16" Flush inside mount square valances are an up charge and need to be phone ordered. *CAUTION NORMAN DEDUCTS ONLY 3/8" DEDUCTION ON INSIDE MOUNT.
Norman Performance Premium are Premium composite faux wood blinds that are custom made to our customer specifications. These blinds will be shipped in 10 days from the manufacturer.
In depth specification>>> Click here for Blind Specifications
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measure For Wood or Faux Wood Blinds
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
• An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
• Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.