Levolor Visions 2 inch Whites Faux Wood Blinds

$31.76

Levolor Visions faux Standard Colors wood blinds combine the natural look and warmth of real wood with durability ease of cleaning and humidity resistance, but at a fraction of the cost.These are Levolor Visions standard colors whites.

Change the size below to see your price

$31.76

Visions™ Faux Wood

Visions by Levolor
  • Moisture resistant
  • Economical choice
  • Available in 2" and 2-1/2" slat sizes
lightmaster
 
 

Lightmaster™

  • Maximum light control.
  • A no rout hole design blocks light and prevents outside 'see through'.
  • Available in Premium Real Wood Blinds, NuWood™, and Visions™.

Multiblinds per Headrail

multiple
  • Provides the flexibility of raising one blind while keeping the other lowered on extra wide windows or patio doors.
  • Two or three blinds on one headrail are available up to a total maximum width of 144".
  • Minimum innerspace is 1/2" between blinds.
  • Horizontal slat alignment not guaranteed.

 

Valance
Tradional Valance for faux wood blinds

Traditional
Available in 2" and 2 1/2"

-OR-

Comtemporary Valance

Contemporary
Available in 2" and 2 1/2"

Tilt
Wand tilet

wand tilt
Put the control in your hands with our optional wand tilt. Not available on 2 1/2" Premium Real Wood Blinds.

-OR-

Cordless with wand tilt

Cordless Levolor Faux Wood

 

2 1/2" and 2" Vision™ Faux Wood Inside Mount
Minimum Width
Inside Mount
Maximum Width
Outside Mount
Minimum Width
Outside Mount
Maximum Width
Tilt and Lift Controls-Opposite Side 10-1/4" 96-1/2" 10" 96"
Tilt Control in Center-No Lift Control 9-1/2" 10-1/4" 9-1/4" 10"
No Tilt and Lift Controls; Slats in Open Position 6-7/8" 9-1/2" 6-5/8" 9-1/4"

 

stacking chart

Blind Height 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120"
1" Slats 7-3/4" 8-1/2" 9-1/2" 10-1/2" 11-1/4" 12-1/2" 13" 15" 17" 18-1/2" 20-1/4"
2" Slats 6" 6-1/4" 7" 8" 9" 9-1/4" 9-1/2" 10-1/2" 12-1/2" 13-1/2" 15"
2 1/2" Slats 5-1/4" 5-3/4" 6-1/4" 6-3/4" 7-1/4" 7-3/4" 8-1/4" 9-1/4" 10-1/4" 11-1/4" 12-1/4"

Stacking dimensions are approximate and could vary +/- 1".

2" and 2 1/2" Visions™ Wood Inside Mount
Blind Width
Outside Mount
Blind Width
Number of
Ladders and Tapes
Number of
Standard Cords
Number of
LightMaster™ Cords
  10-1/2" - 19-1/2" 10" - 19" 2 2 4
  19-5/8" - 33-1/2" 19-1/8" - 33" 3 2 4
  33-5/8" - 45-1/2" 33-1/8" - 45" 4 4 8
  45-5/8" - 57-1/2" 45-1/8" - 57" 5 3 6
  57-5/8" - 69-1/2" 57-1/8" - 69" 6 4 6
  69-5/8" - 81-1/2" 69-1/8" - 81" 7 4 8
  81-5/8" - 93-1/2" 81-1/8" - 93" 8 4 8

Note difference in number of ladders. Premium Real Wood provides better, uninterrupted view through the window

 

 

 

Cream 12067102 View Larger
Sandblasted-Ultra-White 12067108 View Larger
Ultra White 12067109 View Larger
White 12067101 View Larger
Sand 120NU004 View Larger
Sandblasted-Sand 12067403 View Larger
Sandblasted White 12067110 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Install Instructions