- Call us 800-836-4488
- Measure/Install
- Submit a testimonial
Levolor Visions faux Standard Colors wood blinds combine the natural look and warmth of real wood with durability ease of cleaning and humidity resistance, but at a fraction of the cost.These are Levolor Visions standard colors whites.
Traditional
Available in 2" and 2 1/2"
Contemporary
Available in 2" and 2 1/2"
wand tilt
Put the control in your hands with our optional wand tilt. Not available on 2 1/2" Premium Real Wood Blinds.
cord tilt
Traditional control. Not available on 2" Cordless and 1" Premium Real Wood Blinds.
| 2 1/2" and 2" Vision™ Faux Wood |
Inside Mount Minimum Width |
Inside Mount Maximum Width |
Outside Mount Minimum Width |
Outside Mount Maximum Width |
|---|---|---|---|---|
| Tilt and Lift Controls-Opposite Side | 10-1/4" | 96-1/2" | 10" | 96" |
| Tilt Control in Center-No Lift Control | 9-1/2" | 10-1/4" | 9-1/4" | 10" |
| No Tilt and Lift Controls; Slats in Open Position | 6-7/8" | 9-1/2" | 6-5/8" | 9-1/4" |
| Blind Height | 36" | 42" | 48" | 54" | 60" | 66" | 72" | 84" | 96" | 108" | 120" |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1" Slats | 7-3/4" | 8-1/2" | 9-1/2" | 10-1/2" | 11-1/4" | 12-1/2" | 13" | 15" | 17" | 18-1/2" | 20-1/4" |
| 2" Slats | 6" | 6-1/4" | 7" | 8" | 9" | 9-1/4" | 9-1/2" | 10-1/2" | 12-1/2" | 13-1/2" | 15" |
| 2 1/2" Slats | 5-1/4" | 5-3/4" | 6-1/4" | 6-3/4" | 7-1/4" | 7-3/4" | 8-1/4" | 9-1/4" | 10-1/4" | 11-1/4" | 12-1/4" |
Stacking dimensions are approximate and could vary +/- 1".
| 2" and 2 1/2" Visions™ Wood |
Inside Mount Blind Width |
Outside Mount Blind Width |
Number of Ladders and Tapes |
Number of Standard Cords |
Number of LightMaster™ Cords |
|---|---|---|---|---|---|
| 10-1/2" - 19-1/2" | 10" - 19" | 2 | 2 | 4 | |
| 19-5/8" - 33-1/2" | 19-1/8" - 33" | 3 | 2 | 4 | |
| 33-5/8" - 45-1/2" | 33-1/8" - 45" | 4 | 4 | 8 | |
| 45-5/8" - 57-1/2" | 45-1/8" - 57" | 5 | 3 | 6 | |
| 57-5/8" - 69-1/2" | 57-1/8" - 69" | 6 | 4 | 6 | |
| 69-5/8" - 81-1/2" | 69-1/8" - 81" | 7 | 4 | 8 | |
| 81-5/8" - 93-1/2" | 81-1/8" - 93" | 8 | 4 | 8 |
Note difference in number of ladders. Premium Real Wood provides better, uninterrupted view through the window
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measure For Wood or Faux Wood Blinds
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
• An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
• Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
Install Instructions
