Levolor 1 inch Real Wood Blind

Priced as low as

Based upon a size of 24x36

Premium quality hard wood blinds for the consumer who demands craftsmanship, style and the warmth of real wood. Comes with a valance in matching color. Cloth tapes are available on this product.

Caution due to 12-15-18 federal safe cord act, multiple cords will be attached to this blind with lightmaster options.

A new safety standard has been taken into effect limiting the manufacturing of corded blinds in response to fears they could injure or kill children and/or pets by strangulation.
Starting December 15 2018, most products must either be cordless or have shorter, inaccessible cords. Cords will be made 1/3 of the ordered height of the blind, but custom length cords can be requested at the time of order. To avoid order questions, if you need longer cords especially for higher windows, please specify the length controls that will work for you in the order comments box.

Priced as low as

Based upon a size of 24x36

This blind is used for that very small place like a french door where there is little clearance for a window blind.

Levolor Logo Blindsexpress Logo

Levolor Preium hardwood 1 inch wood blind,

Premium Real Wood - recommended for high traffic areas such as living rooms and dining rooms.

  • The most complete stain selection available in the marketplace.
  • The specially selected stains and wood grains of this collection are designed to harmonize with furnishing, any space, or any style.From maple to cherry to pecan tones, this collection has it all.
  • Our Premium Real Wood Paints are designed to complement finishes in your home from crown molding to window frames.
  • We painstakingly prepare each slat with multiple coats of the highest quality paints to ensure a blind which resists scratching and keeps its new look.
1" Premium Real Wood Inside Mount
Minimum Width
Inside Mount
Maximum Width
Outside Mount
Minimum Width
Outside Mount
Maximum Width
Tilt and Lift Controls-Same Side 16" 96-1/2" 15-1/2" 96"
Tilt and Lift Controls-Opposite Side 10" 96-1/2" 9-1/2" 96"
Tilt Control in Center-No Lift Control 9-1/2" 10" 8" 9-1/4"
No Tilt and Lift Controls; Slats in Open Position 5-1/2" 9-1/2" 5" 8"

stacking chart

Blind Height 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120"
1" Slats 7-3/4" 8-1/2" 9-1/2" 10-1/2" 11-1/4" 12-1/2" 13" 15" 17" 18-1/2" 20-1/4"
2" Slats 6" 6-1/4" 7" 8" 9" 9-1/4" 9-1/2" 10-1/2" 12-1/2" 13-1/2" 15"
2 1/2" Slats 5-1/4" 5-3/4" 6-1/4" 6-3/4" 7-1/4" 7-3/4" 8-1/4" 9-1/4" 10-1/4" 11-1/4" 12-1/4"

1 inch slat

1 inch wood blinds
  • Ideal for french doors
  • Narrow window depth
  • Selection of 14 finishes of the most popular paints and stains to ensure color matching to home décor
1" Premium Real Wood Inside Mount
Blind Width
Outside Mount
Blind Width
Number of
Ladders and Tapes
Number of
Standard Cords
Number of
LightMaster™ Cords
  10" - 32-1/2" 9-1/2" - 32" 2 2 n/a
  32-5/8" - 52-1/2" 32-1/8" - 52" 3 2 n/a
  52-5/8" - 72-1/2" 52-1/8" - 72" 4 4 n/a
  72-5/8" - 96-1/2" 72-1/8" - 96" 5 4


Check Here Before Ordering Click here for 1" Wood Blinds Specifications


Brandy 11081338 View Larger
Almost White 11002321 View Larger
Chestnut 11002777 View Larger
Colonial Mahogany 110DS003 View Larger
Colonial Pine 11078082 View Larger
Dover 11081019 View Larger
Espresso 110DS001 View Larger
Golden Oak 11002771 View Larger
Warm White 11002908 View Larger
Cinnamon 11081341 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

*On woods and faux woods The factory will take a slight deduction on OM products to alot for box bracket width. The slats should come the width you order for proper coverage of product.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Install Instructions