Graber Slide-Vue vertical cellular blind Style Garden Retreat 3/8 inch single cell

Priced as low as

Based upon a size of 24x36

Graber's Slidevue cell shades are the perfect application for patio doors, wide windows and room dividers. Movable side rails with locking handles for ease of operation: allows stack of material to be positioned on right, left, or in the center. Easy to install. Cellular fabric construction provides superior energy efficiency. This blind is a vertical sliding cellular shade that features sliding fabric.

Priced as low as

Based upon a size of 24x36

Headrail is always in white.Stacking is 13.25 on most verticells.


Graber Vertical Cells specifications

Bali verticell blind and shade  
Product information for:

Wide Window Solutions

Cover wide windows in style.

Graber Vertical Blinds provide a comprehensive selection of sheer, fabric and vinyl solutions for wide windows and patio doors.

  • Vinyl Vertical blinds match 2" Vinyl Horizontal blinds for a total-room solution.
  • Select Traditional Verticals blind fabrics coordinate with Pleated, Solar, Roller and Roman shade fabrics.
Other stylish alternatives are also available, including Sliding Panels, Natural Drapes, VertiCellCellular Shades or Wood Vertical blinds.
Click her for more specific info on Graber vertical blinds...Details  


Apollo 0902 View Larger
Solitaire 0901 View Larger
Chalk 0903 View Larger
Creamy 0904 View Larger
Threshold Taupe 0910 View Larger
Sandcastle 0913 View Larger
Quicksand 0915 View Larger
Spring Rain 0916 View Larger
Grasscloth 0931 View Larger
Khaki 0944 View Larger
Classic Navy 0947 View Larger
Cayenne 0972 View Larger
Espresso 0971 View Larger
Cilantro 0973 View Larger
Tide Pool 0994 View Larger
Colonial Slate 0993 View Larger
Riverbed 0990 View Larger
Poppyseed 0989 View Larger
Country Barn 0988 View Larger
Valley Vine 0987 View Larger
Inlet 0979 View Larger
Antler 0978 View Larger
Cirrus 0977 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Slide-Vue™ Cellular Shades

Inside Mount
Inside Mount shades are installed inside the window casing or door, or wall to wall in a room. For inside mount recess requirements, see your designer or sales associate.

    1. Watch Video - Measuring for Inside, Side & Ceiling Mount (2.19 MB)
    2. Measure the exact inside width of window casing from one inside edge to the other in three different places. Record the narrowest measurement.
    3. Measure the exact height in three different places from top edge of opening to top of sill. Record the longest measurement.
    4. Measure the window diagonally in two places, as shown. If the diagonal dimensions are not equal, we recommend an outside mount application for optimal function and aesthetics.
    5. Do not take any deductions for clearance. The factory will take necessary deductions for a perfect fit.

Outside Mount
Outside mount shades are installed outside the window casing, covering an area larger than the window itself.

    1. Measure the exact width of window, including frame if there is one. Add 3" for each side (6" total overlap) to ensure light control and privacy.
    2. Measure height of window from top edge of molding to bottom edge, or to top of sill if there is one. Add 3" to allow for adequate mounting area above the window.
    3. If shade extends to floor (i.e. to cover patio door), measure height in three places, take the smallest measurement.
    4. Do not take deductions. Allowances are made at the factory to ensure a perfect fit.
    5. If you want the entire window uncovered when the shade is fully open, you may need to add more than 6" to the width. See designer or sales associate for additional guidance.


Installation Instructions inside mount

Iinstallation Instructions Outside mount