Graber Slide-Vue vertical cellular blind Style Cocoon Double 3/8 inch cell

Priced as low as

Based upon a size of 24x36

Graber's Slidevue cell shades are the perfect application for patio doors, wide windows and room dividers. Movable side rails with locking handles for ease of operation: allows stack of material to be positioned on right, left, or in the center. Easy to install. Cellular fabric construction provides superior energy efficiency. This blind is a vertical sliding cellular shade that features sliding fabric.

Priced as low as

Based upon a size of 24x36

Headrail is always in white.Stacking is 13.25 on most verticells.


Graber Vertical Cells specifications

Bali verticell blind and shade  
Product information for:

Wide Window Solutions

Cover wide windows in style.

Graber Vertical Blinds provide a comprehensive selection of sheer, fabric and vinyl solutions for wide windows and patio doors.

  • Vinyl Vertical blinds match 2" Vinyl Horizontal blinds for a total-room solution.
  • Select Traditional Verticals blind fabrics coordinate with Pleated, Solar, Roller and Roman shade fabrics.
Other stylish alternatives are also available, including Sliding Panels, Natural Drapes, VertiCellCellular Shades or Wood Vertical blinds.
Click her for more specific info on Graber vertical blinds...Details  


Fresh Brew 3847 View Larger
Scarlet 3806 View Larger
Salted Caramel 3819 View Larger
Molten Silver 3828 View Larger
Lemon Tree 3814 View Larger
Iron Gate 3851 View Larger
Desert Dust 3839 View Larger
Arboretum 3830 View Larger
Livingston 3822 View Larger
Orchard Ridge 3824 View Larger
Savannah 3820 View Larger
Twine 3854 View Larger
Stormy Sky 3850 View Larger
Inlet 3829 View Larger
Hazy Skies 3848 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Slide-Vue™ Cellular Shades

Inside Mount
Inside Mount shades are installed inside the window casing or door, or wall to wall in a room. For inside mount recess requirements, see your designer or sales associate.

    1. Watch Video - Measuring for Inside, Side & Ceiling Mount (2.19 MB)
    2. Measure the exact inside width of window casing from one inside edge to the other in three different places. Record the narrowest measurement.
    3. Measure the exact height in three different places from top edge of opening to top of sill. Record the longest measurement.
    4. Measure the window diagonally in two places, as shown. If the diagonal dimensions are not equal, we recommend an outside mount application for optimal function and aesthetics.
    5. Do not take any deductions for clearance. The factory will take necessary deductions for a perfect fit.

Outside Mount
Outside mount shades are installed outside the window casing, covering an area larger than the window itself.

    1. Measure the exact width of window, including frame if there is one. Add 3" for each side (6" total overlap) to ensure light control and privacy.
    2. Measure height of window from top edge of molding to bottom edge, or to top of sill if there is one. Add 3" to allow for adequate mounting area above the window.
    3. If shade extends to floor (i.e. to cover patio door), measure height in three places, take the smallest measurement.
    4. Do not take deductions. Allowances are made at the factory to ensure a perfect fit.
    5. If you want the entire window uncovered when the shade is fully open, you may need to add more than 6" to the width. See designer or sales associate for additional guidance.


Installation Instructions inside mount

Iinstallation Instructions Outside mount