Our Brand Clouds free hanging 3.5 inch wide vertical vane width blinds is a polyester translucent to light but private to view vertical blind. This soft air looking fabric vertical lends to any rich decorating theme.This fabric has been inserted into a vinyl backer that that customer must chose at the time of the order white or Ivory.
Based upon a size of 24x36
Sleek, modern and distinctive, Vista Vertical Blinds are window coverings that are functional, durable and a beautiful addition to your home. Verticals are a traditional window covering for sliding glass and patio doors and are available in a wide variety of styles to suit your needs, from practical to fashionable. A versatile solution, verticals provide energy efficiency, excellent light control, privacy or they will clear your window for a beautiful view.
Scissor carrier track allows for more consistent spacing and overlapping of louvers than strap carrier.
Endurance™ headrail is a heavy duty design at regular duty prices.
Replace broken louver stems with the push of a button.
Metal strap carrier track has 33% tighter stacking space providing a greater viewing area on inside mount applications.
Unique stack release lever allows stacked back vanes to be moved to the center of the window for easy cleaning.
One way stacks to the left or right
Stack and controls are on the same side of the headrail
|Split Way stacking that splits the vanes evenly to the left and right|
|Reverse Stacking alows for stacking on one side and controls on the opposite.|
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measuring for Vertical or Soft Sheer Verticals
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will make the correct deduction from the total width to allow for proper installation. Most manufacturers’ deduct 1/4” from the total width.
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the smallest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• For verticals make sure the measurement overlaps the window opening by at least 3" on each side to ensure light control and privacy.
If you want the entire window uncovered when the shade is fully open, you may need to add more than 3" to the width on each side.
Determine if the head rail will be on the molding or above and mark the spot.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the head rail to bottom of your desired height.
• Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening.
Measure height to be covered from top of head rail location to top of sill or lower if overlap is desired for light control and privacy. Record measurement, if shade extends to the floor (i.e. to cover a patio door), measure height as described above, and deduct at least ½" for clearance in order for the fabric to clear the floor. Note: The manufacturer makes NO deductions on outside-mount installations.
Installation instructions are always included in the packaging and if you have any questions call us at 1.800.836.4488 or email us at email@example.com.