This page offers GUIDELINES for MOST products listed. It is strictly a guide. Manufacturers can change specs at any time, so it is wise to call us or research the manufacturer sites for the most up to date information.
IMPORTANT TO READ BEFORE YOU MEASURE:
For all types of shades (shutter instructions may vary -call Customer Service or e-mail us for more info):
Width-Take the exact window opening to the nearest 1/8 of an inch. It is important to measure the top, middle and bottom widths. Remember, not all windows are perfect-even in new homes! Take the smallest of the widths that you measure.Important: for horizontal wood products, if the smallest measurement is at the bottom of the window, you may need to specify in the order comment field what the top measurement is. This will ensure a proper fitting valance. Please See "More Measuring Tips.." below for DEPTH instruction for wood blinds and faux woods. This will explain the "inside mount with returns" option.
Height-When measuring the height, always measure in 3 places across the window. Take the longest of the three measurements.
NOTE: The factory takes deductions on all Inside Mounts headrail and product according to the manufacturer specifications.
Fabrics are usually less than headrail size after deductions are taken. With respect to the sheer horizontal shade the fabric may be 5/8" inch narrow on one side and 1/2" on the other depending on particular product ordered. Roller shades have generally large deductions due to the make of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally - 1 1/8" or more from ordered width on inside mount and can vary for an Outside Mount depending on what type of roller shade you order.
NOTE: Due to the narrow fabric that results with a standard spring roller shade, cassette, cord loops and cordless. Deductions vary on these products. Call us before ordering for specs!
NOTE: Sheer Horizontals An inside mount will come 1 1/8" less than ordered width. There will be some gapping on the sides of the product. This is because the product is made to roll inside its headrail. This is the only way an inside mount sheer horizontal is made by ALL manufacturers.
Outside mount blinds are either mounted to the surface of the trim (window casing) outside the opening or on wall surface above opening or casing.
Width- Measure the exact width to be covered. If yo have a dry wall opening with no molding, it is best to be sure the measurement overlaps the window opening by at least 1 ½" on each side (3" total overlap) to ensure light control and privacy. Some products have deductions even if they are an outside mount. And deductions vary with each type of product. If you have any questions on the various deductions, contact us for help PRIOR TO ORDERING!
Measure the exact height from the outer edge of the top of the molding to the top of the window sill or to the exact finished length desired. Measure the height in 3 places (the right side, middle and left side of the window); round the measurement up to the nearest 1/8 inch. Agaig if you are not mounting to the trim or you do not have trim, please call us for each product specs and we can help you with your measurement.
NOTE: For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 3" on each side (6" total overlap) to ensure light control and privacy.
NOTE: For Soft Sheer Horizontal Shades, Outside Mount for soft horizonatl sheers MUST be ordered 1.5" wider than the opening for the fabric to be large enough to cover. Becasue this product rolls inside the headrail, the fabric is much smaller in width than the headrail width.
NOTE: For Vertical Blinds, for full coverage, it is recommended to add to the outside frame to frame measurement. If outside mounting and you have a frame or trim, add 3 inches past the edge of the trim on both sides(total of 6 inches to outside width edge of trim to ege of trim measurement)
Height-When measuring the height, an outside mount product will come the height you order from the top of the headrail of the product to the bottom of the bottom rail. It is important to understand tha the height includes headrail, material and bottom rails.
NOTE: For Vertical Blinds, If mounting above the trim to the wall, you will need to add 2 inches to the height so that you have enough space to mount the brackest above the trim. Vertical brackets need 2 inches of surface area to mount to. Be sure you alot ofr this in your Outside measurement. Call us for help or further instructions.
MORE Measuring Instruction And Helpful Hints.....
DEPTH for Horizontal products:
If you do not have exact inside mount flush depth required for the product you are ordering, the product will stick out - especially with wood blinds or the horizontal sheer products. For WOOD BLINDS, you can hide the top rail and brackets on an non-flush inside mount by simply ordering your valances with returns (Shallow Mount Valance With Returns). This is an option for all of our wood and faux wood products.We DO NOT charge for this request if done at time of order. The returns will cover the hardware and go back toward the edge of the molding. You may need to trim off excess wood on the returns.Or, you may specify the size of return needed in the order comment field. INSIDE MOUNT VALANCE DO NOT COME WITH RETURNS-THEY COME AS ONE FLAT PIECE OF VALANCE MATERIAL.
French doors are a little tricky. Most French Doors have a glass "trim" that goes around the out side of the glass. You will measure outside of that molding (trim) and add 2 inches total (if possible -depending on your handle placement). This means 1" coverage on each side past your trim. Measure the same outside door trim top to bottom and add 4 inches total to that measurement. Be sure to aask for the free Hold Down brackets so the blind doesn't bang on the door in use AND ask for spacers. These are used to push the shade out when installing so it does not internfere vertically with trim.
We do not recommend a side mount for any blind over 48 inches in width. We highly recommend that you speak to or e-mail our customer service before ordering a side mount. Some products can not be side mounted and there are sizing issues you need to know prior to ordering.
Special Matching Patterns/Alignment:
Anytime you are ordering window treatments for the same room/window note that fact in the order comment field of your order. The manufacturer will make every attempt to match patterns and align if within their ability. This also applies to side by side window applications. Please note:Though they make every attempt to align similar products of same size and height, some manufacturers do not promise alignment.
Side By Side Alignment:
If you are ordering shade that are side by side and need pattern or fold alignment, please specify this in your order comments. Not all products guarantee alignment even if they are the same height.However most manufacturers do try to match the products to the best of their ability if notified. This MUST be noted at time of order.
For any questions, please call Customer Service BEFORE placing your order and we will be happy to help!