Levolor 1 inch Riviera Classic 8 Gauge Aluminum

Priced as low as

Based upon a size of 24x36

Riviera 1 combines Levolor quality, fashion and value into a product that is affordable and elegant. Made to fit not only your window and but also your budget.This is a 1" 8 gauge aluminum mini-blind.This is the old classic used for any room.

A new safety standard has been taken into effect limiting the manufacturing of corded blinds in response to fears they could injure or kill children and/or pets by strangulation.
Starting December 15 2018, most products must either be cordless or have shorter, inaccessible cords. Cords will be made 1/3 of the ordered height of the blind, but custom length cords can be requested at the time of order. To avoid order questions, if you need longer cords especially for higher windows, please specify the length controls that will work for you in the order comments box.

Priced as low as

Based upon a size of 24x36

Levolor Logo Blindsexpress Logo

Levolor's Traditional Tried and True 1 inch Classic

Reduce Dust Buildup

Dust buildup on blinds is reduced by over 50% with the exclusive DustGuard™ feature.

Reduce Glare

Exclusive SheerView option provides a light filtering feature and reduces glare.

Control Light

Total light control is achieved by eliminating route holes with the exclusive LightMaster™ option.

Environmentally Friendly

Premium slats are partially made from recycled aluminum.


Cordless lift system is easy to use and is safe for children and pets.


  • Metal blinds for every type of window.
  • Standard Vogue™ valance provides a uniform appearance.
  • Available in specialty shapes.
  • LightMaster™ and SheerView options available on Riviera Classic 1" model.
  • Durable steel headrail components standard.
  • 8 gauge premium slats standard

Riviera classic


Check Here Before Ordering Click here for Aluminum Blind Specifications

148 Vanilla View Larger
110 White View Larger
765 Wood Violet View Larger
112 Alabaster View Larger
137 Almond View Larger
815 Birch View Larger
890 Black View Larger
202 Blush White View Larger
571 Cactus Sage View Larger
637 China Blue View Larger
111 Cotton View Larger
885 Dark Bronze View Larger
115 Dover View Larger
641 Evening Shadows View Larger
275 Garnet Red View Larger
292 Gingersnap View Larger
312 Greige View Larger
201 Ivory View Larger
892 Low Gloss Black View Larger
316 Malibu Sand View Larger
860 Mercury View Larger
862 Pearl Grey View Larger
116 Polar Bear View Larger
887 Raw Umber View Larger
268 Real Red View Larger
384 Rich Earth View Larger
685 Royal Navy View Larger
310 Sand View Larger
590 Sherwood Green View Larger
820 Squirrel Grey View Larger
113 White Cap View Larger
365 Mushroom View Larger
368 Beacon Brown View Larger
870 U.N. Gray View Larger
1388 Vapor View Larger
1389 Golden Mist View Larger
1392 Quartz White View Larger
1393 Glazed Bisque View Larger
2826 Canyonstone View Larger
2828 Claystone View Larger
2814 Sandstone View Larger
2815 Earthstone View Larger
31 Satin Nickel View Larger
34 Brushed Aluminum View Larger
968 Ash Bronze View Larger
1440 Cityscape View Larger
1441 Galleria View Larger
915 Copperite View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Aluminum Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.