Our Brand Vis .5 inch 6 gauge aluminum mini blinds

Our Brand . 5 inch 6 gauge aluminum micro blinds is quality aluminum blinds you can count on, look to our designs with many fashion colors to match your decor.

Information:
This product includes a Single Slat Valance.

View Price Grid

Our aluminum horizontal blinds are the sleek, versatile solution for your window coverings.

These popular blinds give you flexible control over the amount of light entering a room. You’ll have the option to go from complete privacy to full view at any window.

Horizontal blinds add a clean, contemporary touch to any decor.

More Photos

Aluminum Horizontal Blinds

• Decorative contoured headrail for Windsor Shadow and Windsor Plus requires no valance for a stylish and refined look
• Hidden rout holes on Windsor Shadow prevent unwanted light from entering through when the blind is closed
• Wide variety of colors including Jewels, Metallics, Pearltones, Stripes, and Perforated
• Crash proof cord lock prevents blind and/or window sill damage
• Limited Lifetime Warranty

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Aluminum Blinds.

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Aluminum Blind Installation Instructions