Our Brand VIS Cellular Shades Starlight 1/2 inch Single Cell Value Series

our Brand 1/2" single cell is a budget value cellular blind. This fabric is a soft fabric with a limited white color line. The blinds are noted for their thermal protection ion both the summer and winter.

The cellular shade bonding material is warranted for as long as you own the blind.

View Price Grid

These cellular shades will bring a soft, luminous glow to any room.

Made of soft, amazingly strong fabric, our cellular shades are as substantial as draperies yet sleek and contemporary, without any visible cords or holes. The cellular structure offers superior insulation qualities and consistent crisp pleats. Neutral color to the street creates a uniform look form the exterior of the house.

Available in small and large single cellular and double cellular fabrics ranging from Semi-Sheer to complete blackout.

More Photos

• Seamless fabric up to 120" wide
• Low profile headrail means more available view when shade is raised
• Perfect and imperfect arches
• Patented arch clips install easily to support arch shades and prevent sagging
• Specialty treatments include angles, skylights, top down/bottom up, privacy view and 2 shades on one headrail
• Ez Lift continuous cord system easily lifts large shades
• Motorization and cordless options for added convenience and child safety
• Limited Lifetime Warranty

 

Complete cellular specifications can be found here>>> Click here for Cellular Specs.

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Cellular Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•    French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.
 

Installation Instructions