Our Brand shades look great from any angle. Mounted on a unique track system, These shades can be used vertically, horizontally and even on angles (like skylights) for maximum versatility. These shades are energy-efficient, and insulation is enhanced by the side rail that forms a barrier around the edge of the shades. These shades are child safe with no exposed cords.This is a ROOM DARKENING CELL
Based upon a size of 24x36
Our Brand cellular shades
Inside Mount Only
Use a steel tape to measure the opening at three different places, and use the narrowest dimension when ordering. Be exact! The factory will make the shade narrower so that it will not rub against the window casing. Measure the height of the window from the top (Soffit) down to the sill.
This shade can be used in horizontal and angled applications 0 to 75 degrees: |
![]() |
Minimum Width 15 inches | Maximum Width 36 inches |
Minimum Length 12 inches | Maximum Length 96 inches |
Total shade area must not exceed 24 square feet |
|
Balcony Vertical Applications | |
---|---|
This shade can also be used in vertical applications 75 to 90 degrees: |
![]() |
Minimum Width 15 inches | Maximum Width 48 inches |
Minimum Length 12 inches | Maximum Length 96 inches |
|
![]() |
|
Angled Applications 15 to 75 degrees: |
![]() |
Minimum Width 15 inches | Maximum Width 36 inches |
Minimum Length 12 inches | Maximum Length 96 inches |
|
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measure For Skylight Soprano Specialty Shades-Inside Mount Only
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.