Norman 9/16 Single Cell Room Darkening New Budget Collection All Cordless

Priced as low as

Based upon a size of 24x36

Norman 9/16" Single Cell Collection is a Room Darkening fabric with energy efficiency. Cellular shade in a spunlace soft fabric. Works well with standard cord and top down bottom up.
These shades have a wide variety of colors available to match any decor. The blinds are noted for their thermal protection in both summer and winter seasons.
The cellular shade bonding material is warranted for as long as you own the blind. New cordless and cord loop options are available on larger blinds.

Norman as of 1-1-16 is now charging freight on all their orders..

Priced as low as

Based upon a size of 24x36

This cellular shade has the famous energy star rating and an R-value of 4.6. This is Norman International's cellular division.


Pure Safe

Features Benefits

Exclusive Headrail



• Light yet extremely sturdy with color coordination to the fabric

Unique Fabric

• Unique honeycomb construction insulates from cold and heat for lower energy bills

• Soft to the touch advanced fabric with added thickness for superior insulation

• Neutral color to the street side for an uniformed look

• Easy to clean and maintain


Various Colors • Vibrant colors to match any home decor


Superior Operating System



• Quiet and easy operation


Warranty • 5-year limited warranty



Desert C4504 View Larger
Champagne C4111 View Larger
Glacier White C4001 View Larger
Dusk C4105 View Larger
Eggnog C4514 View Larger
Espresso C4411 View Larger
Flax C4410 View Larger
Fog Green C4601 View Larger
Indigo C4704 View Larger
Mineral C4103 View Larger
Mocha C4402 View Larger
Primrose C4506 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Cellular Blinds

Inside Mount Width

 Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements to the nearest 1/8 of an inch.
 The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
Take the largest of the three measurements.

Outside Mount Width

Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.

Installation Instruction Standard Cord  Cord loop   Cordless

Specification link