Levolor Accordia Cellular Designer Textures 9/16 Single Cell Light Filtering

Priced as low as

Based upon a size of 24x36

Levolor Cellular 9-16 Designer Textures honeycomb blinds in this size cell makes it a perfect fit for every window. Delightful upscale textures with a rainbow of colors. Levolor now offers Designer Textures in light filtering . Designer Textures 9/16 is comprised of several fabrics including a very soft cellular shade fabric. The soft hand enhances the elegant appearance of the fabric. A wide array of neutrals and fashion colors in solids and prints make room coordination easy. Light-filtering Cordless headrails are color coordinated but the cord loop headrails are always off white.

Priced as low as

Based upon a size of 24x36

Levolor cellular blinds have color coordinated hardware chosen by the manufacturer design team. Not all colors match exact to fabric. For questions on hardware color, please call us prior to ordering.

Cayenne 19370342 View Larger
Graphite 19370345 View Larger
Mink 19370110 View Larger
Toffee 19370216 View Larger
Whisper 19370101 View Larger
Snow 19370199 View Larger
Sand 19370247 View Larger
Marine 19370337 View Larger
Daylight 19370104 View Larger
Amethyst 193PU001 View Larger
Sangria 19370801 View Larger
Bayleaf 193GE001 View Larger
Espresso 19380804 View Larger
Slate 19370800 View Larger
Black 19370147 View Larger
Aqua 19370336 View Larger
Raffia 19370331 View Larger
Light Grey 19370343 View Larger
Fresh Green 19370333 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Cellular Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•    French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.

Installation Instructions