Graber Fashion EvenPleat 1 inch Brighton

Priced as low as

Based upon a size of 24x36

Graber Pleated Shade Fashion EvenPleat Brighton is a simple but rich basket weave. Cordless is NOT AVAILABLE on this product. This fabric is seamless up to 84 inches.

Priced as low as

Based upon a size of 24x36

Limited Lifetime Warranty.

Pleated shades



Call us with any questions: 1.800.836.4488

 Click here for Pleated Blind Extensive Specifications
/httpdocs/img/Graber-specs-img/graber-spec1.jpg Choose Pleated Shades for dynamic style and warm colors that are truly timeless. EvenPleat® Pleated Shades feature a back-ladder support guaranteed to keep pleats evenly spaced and prevent sagging, while FashionPleat® Pleated Shades feature the same great pleated style without the back-ladder design for a more economical alternative. Both EvenPleat and FashionPleat Pleated Shades are available with 1" pleats, and now EvenPleat offers select fabrics with 2" pleats for your larger windows. Both styles are available in sheer, light-filtering and room-darkening fabrics to help you find privacy and light-control levels perfect for your space.

EvenPleat® unique design keeps every pleat crisp and uniformly spaced from top to bottom - the fabric will not sag or stretch over time, ensuring more consistent color and light control.


Operating Systems & Controls

Standard Cord Lift System

Color-coordinated standard cord includes a cordlock, which holds the cord securely in place at any position.

img/Graber-specs-img/cordless.gifCordless Lift System

Cordless blinds and shades are a safe solution, ideal for homes with children or pets. Plus, the elimination of the lift cord presents a clean, attractive appearance.


Continuous-loop Lift System

Powerful clutch smoothly operates shades. Safety tension device maintains a constant cord length and keeps out of children's reach.

Bottom Up/Top Down Corded

Lower your shades from the top or raise them from the bottom. This allows you to maintain privacy or screen an unwanted view while letting natural light come in.




Bone 4122 View Larger
White 4119 View Larger
Bark 4105 View Larger
Graham Cracker 4103 View Larger
Platinum 4150 View Larger
Sugar Maple 4102 View Larger
Tundra 4101 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Pleated Shades

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•    French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.

Installation Instructions-Click Here