Graber Natural Shade Style Escape Standard Roman

Priced as low as

Based upon a size of 24x36

Graber blinds presents Escape Woven Woods a tightly woven Bamboo small reed .

Priced as low as

Based upon a size of 24x36

A Standard Roman Style Shade accentuates the beautiful natural material with clean, classic styling, raising into neat flat folds. The popular design of our New Looped Roman Style Shades features soft, billowing loops of natural material for a more dimensional look.

Standard Woven style  
Old Style Woven "Front Boarded No Valance"  
Looped Roman Woven Wood  
Edge Banding available on many Styles:  
Fabric Edge Banding

Frame your Natural Shades and Valance with 1" or 2" fabric edge banding.

Deco-Finish Valance

Add wordly charm with a Seascape, Dentil, Cathedral or Horizon Valance. Gimp trim conceals the design cut on both front and back.

Standard 6 inch Valance Standard 9 inch Valance
Privacy Liner

Preserve your solitude with a Privacy Liner in White, Tan, Cocoa or Black Coffee. For a neutral look facing the outside of your windows, choose a White Privacy Liner.

Room Darkening Liner

To block light completely, add a Room Darkening Liner in Tan, Cocoa or Black Coffee. Room Darkening Liners are colored on the side facing your shade, and white on the side facing the outside.


Operating Systems & Controls

Standard Cord Lift System

Color coordinated standard cord includes a cord lock, which holds the cord securely in place at any position.


Continuous-loop Lift System

Powerful clutch mechanism smoothly operates shades. Cord locking device maintains a constant cord length and keeps cord out of children's reach.


Bottom Up/Top Down Standard Corded

Lower your shades from the top or raise them from the bottom. This allows you to maintain privacy or screen an unwanted view while letting natural light come in.


Graber Warranty  


Forest-25601 View Larger
Island-25602 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measuring for Woven Woods

Inside Mount Width
•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will make the correct deduction from the total width to allow for proper installation.  Most manufacturers’ deduct 3/8” from the total width.

Inside Mount Height
•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width
•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    For Woven Woods make sure the measurement overlaps the window opening by at least 2" on each side to ensure light control and privacy I

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructions-Click Here