NEW CORDLESS OPTION NOW AVAILABLE !!! Our Brand Zebra Sheer shade is a brand new innovation where the striped fabric across two layers creates the open and closed effect. When the side chain is operated you are able to maneuver the shade to be either closed, so that you cannot see through it or by coordinating the open weave you are able to create the sheer effect (open). If you wish to lift the shade then simply raise the shade like a normal roller shade using the side winder and the shade retracts into the top of the window. The shade is beautifully presented in a cassette.
Based upon a size of 24x36
|Blinds Express Proudly Presents Zebra Shades|
|These Roller shades are a subsitute for Soft sheers and are price very resonable for the same function.|
|Availalbe in light filtering:|
|Available in Room Darkening|
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measuring for Roller Shades
Inside Mount Width
Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements to the nearest 1/8 of an inch.
The factory will make the correct deduction from the total width to allow for brackets and correct installation.Â Roller shades have generally large deductions due to the nature of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally 1 1/8" less than the ordered width on inside mount .
Inside Mount Height
Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
Take the largest of the three measurements and enter it as the height.
Outside Mount Width
Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be installed.
For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 2" to this measurement to ensure light control and privacy. For Zebra shades add 1 /2 inch to the width for coverage and privacy.
Outside Mount Height
Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
Installation Instructions-Cassette Headrail