*Our Brand WL Woven Woods Sumatra Collection with Privacy Liner

Click for Larger View

These shades are Sumatra Collection of woven wood shades.Due to the harvesting of these products the shading may vary from the sample. Woven woods are always a favorite for a very warm decorating flavor to any room.

Information:
WDLD Collection bamboo and rattan with painted & stained finishes. Some designs have natural jute, grass & reeds. Variations in color, grain, texture and warpage are natural and should not be considered to be defective.

View Price Grid

Click here for Woven Wood Blind Specifications

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Woven Wood Natural Shade Blinds

Inside Mount Width
•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width to allow for headrail and correct installation.

Inside Mount Height
•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width
•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.

Outside Mount Height
•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructtions-Click Here