Our Brand LaCosta Soft Horizontal Sheer 2 inch Light Filtering

Our Brand Soft Horizontal Sheer is a soft, light diffusing vane and double sheer fabrics blend to create a unique visual experience. Completely open, completely closed or anywhere in between, bring LaCosta into your world.This blind is translucent to light when closed with complete privacy.

Change the size below to see your price

$167.47

This is a 2 inch vane when open, completely flat when closed.

7104 Dune View Larger
7117_Toasted Coconut View Larger
7100 White Linen View Larger
7102 Beach View Larger
7103_Clay-Bisque View Larger
7118 Cappuccino View Larger
7105 Bright White View Larger
7106_Oyster Shell View Larger
7101 Antique Beige View Larger
7108_White wine View Larger
7129 Water chestnut View Larger
7156 Wheat View Larger
7201 Cloud View Larger
7208 Cream View Larger
7218 Sandshell View Larger
7119 Cafe Latte View Larger
7155 Snow View Larger
7158 Dusty Grey View Larger
7164 Outback View Larger
7165 Olivewood View Larger
7169 Bronzed Ivy View Larger
7199 Onyx View Larger
7116 Oatmeal View Larger
7125 Blush View Larger
7200 Cotton View Larger
7501 Beige View Larger
7516_Biscuit View Larger
7517 Bisque View Larger
7519 Latte View Larger
7569 Auburn View Larger
7599 Ebony View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Horizontal Sheers

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•    French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.
 

Installation Instructions