Our Brand COM Essentials Key Largo 2 1/2 inch Light Filtering Soft Horizontal Sheer (New Design)

Build Your Blind Here

(Click on a sample image to view larger)

Specify your measurements

Width:

Height:

Additional Remote

Add Dust Cover

Add Scotchgard to Fabric

Smart Hub with App

Control Options View Power Touch Option

View Option Samples

Cassette Headrails View Example of Bronze Style

View Option Samples

Hold Down Brackets
Hold Down Brackets are meant for holding down the bottom rails so that the blind doesnt bang on the door after mounting.

Spacer Shims
Spacers are needed if you are mounting over a molding and need the bracket to come forward or mounting above the molding and need to make up the difference in molding depth to mount on the wall above the molding.Also if you are mounting on a door and need to overcome the window mold.

Label Blind by Room

Mounting Options
Inside Mount manufacturers will take 3/8" deduction from this measurement.Outside Mount-manufacturers will not deduct.Exact measure means the rail will come exactly what you want the rail to be.No deductions of any type.

Charger Types for Recharegable Motorization (must add to first initial order)

Side by Side

Special Instructions & Notes

All New Design Our Brand Soft Horizontal Sheer
Spec Guide : Click here!

NEWLY Designed Sophisticated Hardware
Vanes glide from open to closed to out of sight inside elegant hardware. Headrail is 3.75 inches deep. Color coordinated headrail colors.

Soft Fabrics, Unique Performance
The fabric has a delicate feel but is made of a durable polyester. You'll benefit from:

Easy Cleaning: Feather dusting or light vacuuming is all that is needed
Color Choices: Choose from a variety of colors in both light filtering and room darkening fabrics
Available in: 2 inch, 2 1/2 inch and 3 inch fabric vane widths
Omni-View Cord System: Five distinctly different variations of vane positions giving you every combination of privacy, view-through and light control. Unlike the Hunter Douglas Silouette - this shade can be raised in the opened position.

Smooth Operation, Elegant Design
Horizontal fabric vanes float between two layers of soft knitted sheers.

Available with Cord loop, Cordless or Motorization operations

Side By Side Alignment Available
When Sheer Shades are installed side by side, vane alignment can be guaranteed within ¼” only if:

• The shadings are the same color and ordered at the same time.
• The sum total of the widths of all shadings needing alignment is less than 102”.

Completely Rechargeable Motorization Now Available

Simplicity Rechargeable Motors
The Rechargeable Simplicity Motor program features an integrated rechargeable lithium ion battery in the motor casing and is fully concealed by the roller tube.

No special installation hardware or wiring requirements are needed to install motorized shades with Designer Cassettes. No external battery wand is required.

The rechargeable battery comes fully charged from the factory.

The average battery charge will last 6-12 months based on an average sized shade raised and lowered once per day. The life of the battery charge will vary based on the type of window covering selected, the size and weight of the window covering and the number of times the shade is operated on a daily basis.

The battery can be recharged up to 500 times. It takes approximately 5 hours to recharge the motor when fully discharged.

Special Notes:

• Not all motors run at the same rate of speed.
• Simplicity motors have a “Favorites” or “MY” position setting. If the you want to set several shadings at the same intermediate position, follow instructions provided with installation manual.
• WHEN ORDERING THE INTEGRATED RECHARGEABLE MOTORIZATION, PLEASE ORDER THE NECESSARY BATTERY CHARGER.

Solar Panel Recharge Upgrade Option Now Available
Plugs in to any Simplicity rechargeable remote controlled shade

Limited Lifetime Warranty
Warranty details.

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Horizontal Sheers

Inside Mount Width

•   Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•   Take the smallest of the three measurements to the nearest 1/8 of an inch.
•   The factory will take an appropriate deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•   Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•   Take the largest of the three measurements.

Outside Mount Width

•   Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•   Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•   French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•   Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•   Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•   French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.

Installation instructions :

Standard Cord Loop Intructions Motorization Instructions

Reviews

Add Product Review

Horizontal Soft Shade

Appearance

Construction

Installation

Value

Over all Rating

Best quality for the best price. Free, fast shipping. Always

Lisa W

Soft Horizontal Shade for Financial Advisor Client

Appearance

Construction

Installation

Value

Over all Rating

Only order from Blinds Express for years. Best quality, price & service in the industry.

Eileen H

Regular Price:

$0.00

Sales Price

$0.00

Quantity:

Subtotal:

$0.00

Summary:

Colors Available

Measurements

Width: 24 inches
Height: 36 inches

Our Brand COM Essentials Key Largo 2 1/2 inch Light Filtering Soft Horizontal Sheer (New Design)

Build Your Blind Here

(Click on a sample image to view larger)

(Click on a sample image to view larger)

Specify your measurements

Additional Remote

Add Dust Cover

Add Scotchgard to Fabric

Smart Hub with App

Control Options View Power Touch Option × View Option Samples

Cassette Headrails View Example of Bronze Style × View Option Samples

Hold Down Brackets Hold Down Brackets are meant for holding down the bottom rails so that the blind doesnt bang on the door after mounting.

Spacer Shims Spacers are needed if you are mounting over a molding and need the bracket to come forward or mounting above the molding and need to make up the difference in molding depth to mount on the wall above the molding.Also if you are mounting on a door and need to overcome the window mold.

Label Blind by Room

Mounting Options Inside Mount manufacturers will take 3/8" deduction from this measurement.Outside Mount-manufacturers will not deduct.Exact measure means the rail will come exactly what you want the rail to be.No deductions of any type.

Charger Types for Recharegable Motorization (must add to first initial order)

Side by Side

Special Instructions & Notes

Reviews

Summary:

Colors Available

Measurements

Additional Remote

Add Dust Cover

Add Scotchgard to Fabric

Smart Hub with App

Control Options

Cassette Headrails

Hold Down Brackets

Spacer Shims

Label Blind by Room

Mounting Options

Charger Types for Recharegable Motorization (must add to first initial order)

Side by Side

Control Options View Power Touch Option

View Option Samples

Cassette Headrails View Example of Bronze Style

View Option Samples

Hold Down Brackets
Hold Down Brackets are meant for holding down the bottom rails so that the blind doesnt bang on the door after mounting.

Spacer Shims
Spacers are needed if you are mounting over a molding and need the bracket to come forward or mounting above the molding and need to make up the difference in molding depth to mount on the wall above the molding.Also if you are mounting on a door and need to overcome the window mold.

Mounting Options
Inside Mount manufacturers will take 3/8" deduction from this measurement.Outside Mount-manufacturers will not deduct.Exact measure means the rail will come exactly what you want the rail to be.No deductions of any type.