Our Brand 1/2 inch double cell Solid Colors are light filtering fabric with energy efficiency and privacy. This Cellular shade is double honeycomb 1/2 for a larger cell look with a fantastic energy efficiency. Available in cordless and the very popular top down bottom up cordless.
These shades have a wide variety of colors available to match any decor. The blinds are noted for their thermal protection in both the summer and winter.
This spun poly fabric is durable and warranted against coming apart.
Information: This cellular shade has the famous energy star rating and a R-value of 4.6.
Caution: Inside mount blinds
Fabric will measure ordered width less: 3/8" plus or minus 1/8"
Headrail will measure ordered width less 3/16" plus or minus 1/8"
Cellular Shades feature a patented double honeycomb design that provides the ultimate in energy efficient insulation for your home, while the elegant 3/8" pleat offers a clean, classic look. Symphony Cellular Shades also block 99% of damaging UV rays.
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measure For Cellular Blinds
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
• French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
• Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
• French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.
Happy customer? Tell us!
2-day Shipping
View Cart
icons for explanations of options and product selection assistance