Our Brand Roller Shades Style 3000 is a 3 Ply Vinyl shade and one of the Phifer solar fabric groups that are so popular as they are called solar shades by other manufacturers. This shade is composed of 35% PVE-Fiberglass and 65% cotton-PVC blend. This blind can be used for any form of sun protection needed. The shade disperses the suns rays into a soft glow and gives the customer a privacy element. There is no thermal protection given by this shade.
Based upon a size of 24x36
Dense sheer solar sheer product.Opacity (open-ness 14%)FABRIC WILL BE ROTATED 1/4 TURN TO MAKE YOUR BLIND WIDER THAN 96 INCHES.
Our Brand Vis Roller & Solar Roller Specifications
|Questions about installing your roller?|
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measuring for Roller Shades
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will make the correct deduction from the total width to allow for brackets and correct installation. Roller shades have generally large deductions due to the nature of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally- 1 1/8" or more from ordered width on inside mount .
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 2" on each side to ensure light control and privacy.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
• Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.