Bali has joined the new Zebra Shade program with their own styles. They are all very reasonably priced. Bali Layered Shades combine alternating stripes of sheer and solid fabric for a modern take on light control and style. These dual sheer shades give you the best of both worlds?softly-filtered light when the shades are open, superior light blocking when they?re closed?all with a clean, streamlined look.
Based upon a size of 24x36
|Bali Layered or Zebra Shades|
|Custom layered shades give you the view you want without the worry, thanks to horizontal stripes of fabric that alternate between sheer and semi-opaque or opaque fabric:|
|When Fabric is aligned you will have a sheer view.|
|When Fabric is not aligned you will have complete privacy .|
|Head Rails are Cassette round end type|
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measuring for Roller Shades
Inside Mount Width
Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
Take the smallest of the three measurements to the nearest 1/8 of an inch.
The factory will make the correct deduction from the total width to allow for brackets and correct installation.Â Roller shades have generally large deductions due to the nature of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally 1 1/8" less than the ordered width on inside mount .
Inside Mount Height
Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
Take the largest of the three measurements and enter it as the height.
Outside Mount Width
Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be installed.
For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 2" to this measurement to ensure light control and privacy. For Zebra shades add 1 /2 inch to the width for coverage and privacy.
Outside Mount Height
Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
Installation Instructions-Cassette Headrail