Bali Custom Tailored Roman Shades in this Cotton Stripe Looped style is a traditional looped look with seams Roman shade. This style Cotton Stripe is a tone on tone.
This roman shade is unique in that it is hand sewn and drapery room fabricated. With this fact in mind the shipment of these shades are taking 30-45 days.
The cord control is behind the shade as to not to interfere with the rich luxurious look of this roman shade.
Product Specials:
Information: This shade can also be ordered with cord loop option. The fabric is always privacy lined with the price but a Room darkening fabric can be added to control the light entering any room.This fabric has a maximum width with out a vertical seam of 55", any blind over 55" will be seamed equally in thirds.
NOTE: THESE PRODUCTS DO NOT SHIP IN 2-3 WEEKS. THEY TAKE APPROX 6-8 WEEKS TO RECEIVE AS THE FABRIC IS MADE IN CHINA AND SHIPPED FROM CHINA.
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measure For Roman Shades
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
• French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
• Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
• French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.
Happy customer? Tell us!
2-day Shipping
View Cart
icons for explanations of options and product selection assistance