Levolor NuWood Composite Whites & Woodtones 2 inch Faux Wood Blinds

Priced as low as

Based upon a size of 24x36

Levolor Wood Blind - NuWood 2inch Composite is Levolor's premium faux wood blind with many colors and styles.

Priced as low as

Based upon a size of 24x36

Nuwood™ Composite (Faux)

Levolor Nuwood
  • Blends with existing wood finishes in the home
  • Heat, scratch, and moisture resistant
  • Perfect for areas such as kitchen, bath, and garage
  • Quality, durable construction
  • Available in 2" slat size
Levolor Faux wood blinds


  • Maximum light control.
  • A no rout hole design blocks light and prevents outside 'see through'

Valance Styles:


traditional valance for levolor faux wood blinds




Contemporary valance style from levolor


Classic valance by Levolor

Multiblinds per Headrail

Two and Three on one headrail
  • Provides the flexibility of raising one blind while keeping the other lowered on extra wide windows or patio doors.
  • Two or three blinds on one headrail are available up to a total maximum width of 144".
  • Minimum innerspace is 1/2" between blinds.
  • Horizontal slat alignment not guaranteed

nuwood™ composite collection

  • Resist scratching and effects of intense sun and/or moisture
  • Perfect for areas such as bathroom, kitchen, sunroom and garage
  • Coordinate with Premium Real Wood Collections
  • Levolor NuWood™ Composite blinds provide the warmth of real wood's color and grain with the performance of advanced materials. Ideal for areas with intense sun exposure and high humidity, the composite formular provides greater strength and stability. Scratch and dust resistant outer shell is easy to clean. Available in 2" slat size.
2" NuWood™ Composite Inside Mount
Minimum Width
Inside Mount
Maximum Width
Outside Mount
Minimum Width
Outside Mount
Maximum Width
Tilt and Lift Controls-Opposite Side 10-1/4" 96-1/2" 10" 96"
Tilt Control in Center-No Lift Control 9-1/2" 10-1/4" 9-1/4" 10"
No Tilt and Lift Controls; Slats in Open Position 6-7/8" 9-1/2" 6-5/8" 9-1/4"

stacking chart

Blind Height 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120"
1" Slats 7-3/4" 8-1/2" 9-1/2" 10-1/2" 11-1/4" 12-1/2" 13" 15" 17" 18-1/2" 20-1/4"
2" Slats 6" 6-1/4" 7" 8" 9" 9-1/4" 9-1/2" 10-1/2" 12-1/2" 13-1/2" 15"
2 1/2" Slats 5-1/4" 5-3/4" 6-1/4" 6-3/4" 7-1/4" 7-3/4" 8-1/4" 9-1/4" 10-1/4" 11-1/4" 12-1/4"
2" NuWood™ Inside Mount
Blind Width
Outside Mount
Blind Width
Number of
Ladders and Tapes
Number of
Standard Cords
Number of
LightMaster™ Cords
  10-1/2" - 20-3/8" 10-1/4" - 19-7/8" 2 2 4
  20-1/2" - 38-1/2" 20" - 38" 3 2 4
  38-5/8" - 45-1/2" 38-1/8" - 45" 4 4 8
  45-5/8" - 67-1/2" 45-1/8" - 67" 5 3 6
  67-5/8" - 81-1/2" 67-1/8" - 81" 6 4 6
  81-5/8" - 96-1/2" 81-1/8" - 96" 7 4 6

Check Here Before Ordering Click here for 2" Composite Wood Blinds Specifications

Pure White 12067100 View Larger
Colonial Pine 12067405 View Larger
Chenille 12067200 View Larger
Golden Oak 12067217 View Larger
Chestnut 12067404 View Larger
Cherry 120MS009 View Larger
Cotton 120WH003 View Larger
Hickory 12067410 View Larger
Dover 12067160 View Larger
Yorkshire Cream 120NU005 View Larger
White white 12067130 View Larger
Sandblasted White White 12067265 View Larger
Sandblasted Yorkshire Cream 120NU006 View Larger
Sandblasted Dover 12067371 View Larger
Colonial Mahogany 120DS008 View Larger
Espresso 120DS007 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Install Instructions