Levolor Visions faux wood blinds combine the natural look and warmth of real wood with durability ease of cleaning and humidity resistance, but at a fraction of the cost.
Product Specials: Levolor Products 25% Off ALL products!Enter COUPON CODE 6730 below!Limited TIME! (Expires May 31, 2012)
A no rout hole design blocks light and prevents outside 'see through'.
Available in Premium Real Wood Blinds, NuWood™, and Visions™.
Multiblinds per Headrail
Provides the flexibility of raising one blind while keeping the other lowered on extra wide windows or patio doors.
Two or three blinds on one headrail are available up to a total maximum width of 144".
Minimum innerspace is 1/2" between blinds.
Horizontal slat alignment not guaranteed.
Valance
traditional Available in 2" and 2 1/2" Premium Real Wood Blinds.
-OR-
modern Available in 2" and 2 1/2" Premium Real Wood Blinds.
Tilt
wand tilt
Put the control in your hands with our optional wand tilt. Not available on 2 1/2" Premium Real Wood Blinds.
-OR-
cord tilt
Traditional control. Not available on 2" Cordless and 1" Premium Real Wood Blinds.
2 1/2" and 2" Vision™ Faux Wood
Inside Mount
Minimum Width
Inside Mount
Maximum Width
Outside Mount
Minimum Width
Outside Mount
Maximum Width
Tilt and Lift Controls-Opposite Side
10-1/4"
96-1/2"
10"
96"
Tilt Control in Center-No Lift Control
9-1/2"
10-1/4"
9-1/4"
10"
No Tilt and Lift Controls; Slats in Open Position
6-7/8"
9-1/2"
6-5/8"
9-1/4"
stacking chart
Blind Height
36"
42"
48"
54"
60"
66"
72"
84"
96"
108"
120"
1" Slats
7-3/4"
8-1/2"
9-1/2"
10-1/2"
11-1/4"
12-1/2"
13"
15"
17"
18-1/2"
20-1/4"
2" Slats
6"
6-1/4"
7"
8"
9"
9-1/4"
9-1/2"
10-1/2"
12-1/2"
13-1/2"
15"
2 1/2" Slats
5-1/4"
5-3/4"
6-1/4"
6-3/4"
7-1/4"
7-3/4"
8-1/4"
9-1/4"
10-1/4"
11-1/4"
12-1/4"
Stacking dimensions are approximate and could vary +/- 1".
2" and 2 1/2" Visions™ Wood
Inside Mount
Blind Width
Outside Mount
Blind Width
Number of
Ladders and Tapes
Number of
Standard Cords
Number of
LightMaster™ Cords
10-1/2" - 19-1/2"
10" - 19"
2
2
4
19-5/8" - 33-1/2"
19-1/8" - 33"
3
2
4
33-5/8" - 45-1/2"
33-1/8" - 45"
4
4
8
45-5/8" - 57-1/2"
45-1/8" - 57"
5
3
6
57-5/8" - 69-1/2"
57-1/8" - 69"
6
4
6
69-5/8" - 81-1/2"
69-1/8" - 81"
7
4
8
81-5/8" - 93-1/2"
81-1/8" - 93"
8
4
8
Note difference in number of ladders. Premium Real Wood provides better, uninterrupted view through the window
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measure For Wood or Faux Wood Blinds
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
• An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
• Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
Happy customer? Tell us!
2-day Shipping
View Cart
icons for explanations of options and product selection assistance