Levolor Visions Woodtones 2 inch Faux Wood Blinds

Priced as low as

Based upon a size of 24x36

Levolor Visions faux Woodtone Colors wood blinds combine the natural look and warmth of real wood with durability ease of cleaning and humidity resistance, but at a fraction of the cost.These are Levolor Visions non-budget PVC as close to real wood look a likes as you can buy.

Caution due to 12-15-18 federal safe cord act, multiple cords will be attached to this blind with lightmaster options.

If you choose a standard cord tilt or lift option !
A new safety standard has taken into effect limiting the manufacturing of corded blinds in response to fears they could injure or kill children by strangulation.
Starting Dec. 15 2018, most products used to cover windows must either be cordless or have short, inaccessible cords. Cords will be made 1/3 the length of the blind. If you need longer cord please request them in order comments.

Priced as low as

Based upon a size of 24x36

Visions™ Faux Wood

Visions by Levolor
  • Moisture resistant
  • Economical choice
  • Available in 2" and 2-1/2" slat sizes


  • Maximum light control.
  • A no rout hole design blocks light and prevents outside 'see through'.
  • Available in Premium Real Wood Blinds, NuWood™, and Visions™.

Multiblinds per Headrail

  • Provides the flexibility of raising one blind while keeping the other lowered on extra wide windows or patio doors.
  • Two or three blinds on one headrail are available up to a total maximum width of 144".
  • Minimum innerspace is 1/2" between blinds.
  • Horizontal slat alignment not guaranteed.


Tradional Valance for faux wood blinds

Available in 2" and 2 1/2"


Comtemporary Valance

Available in 2" and 2 1/2"

Wand tilet

wand tilt
Put the control in your hands with our optional wand tilt. Not available on 2 1/2" Premium Real Wood Blinds.


Cordless with wand tilt

Cordless Levolor Faux Wood


2 1/2" and 2" Vision™ Faux Wood Inside Mount
Minimum Width
Inside Mount
Maximum Width
Outside Mount
Minimum Width
Outside Mount
Maximum Width
Tilt and Lift Controls-Opposite Side 10-1/4" 96-1/2" 10" 96"
Tilt Control in Center-No Lift Control 9-1/2" 10-1/4" 9-1/4" 10"
No Tilt and Lift Controls; Slats in Open Position 6-7/8" 9-1/2" 6-5/8" 9-1/4"


stacking chart

Blind Height 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120"
1" Slats 7-3/4" 8-1/2" 9-1/2" 10-1/2" 11-1/4" 12-1/2" 13" 15" 17" 18-1/2" 20-1/4"
2" Slats 6" 6-1/4" 7" 8" 9" 9-1/4" 9-1/2" 10-1/2" 12-1/2" 13-1/2" 15"
2 1/2" Slats 5-1/4" 5-3/4" 6-1/4" 6-3/4" 7-1/4" 7-3/4" 8-1/4" 9-1/4" 10-1/4" 11-1/4" 12-1/4"

Stacking dimensions are approximate and could vary +/- 1".

2" and 2 1/2" Visions™ Wood Inside Mount
Blind Width
Outside Mount
Blind Width
Number of
Ladders and Tapes
Number of
Standard Cords
Number of
LightMaster™ Cords
  10-1/2" - 19-1/2" 10" - 19" 2 2 4
  19-5/8" - 33-1/2" 19-1/8" - 33" 3 2 4
  33-5/8" - 45-1/2" 33-1/8" - 45" 4 4 8
  45-5/8" - 57-1/2" 45-1/8" - 57" 5 3 6
  57-5/8" - 69-1/2" 57-1/8" - 69" 6 4 6
  69-5/8" - 81-1/2" 69-1/8" - 81" 7 4 8
  81-5/8" - 93-1/2" 81-1/8" - 93" 8 4 8

Note difference in number of ladders. Premium Real Wood provides better, uninterrupted view through the window




Walnut 12067504 View Larger
Aged White 120WH004 View Larger
Honey Pine 12067505 View Larger
Lush Oak 12067500 View Larger
Pecan 12067501 View Larger
Mahogany 12067503 View Larger
Summer Wheat 120NU003 View Larger
Coffee 120DT001 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Install Instructions