Levolor Classic Value 2 inch Faux Wood Blinds

Priced as low as
$35.75

Based upon a size of 24x36

Levolor Classic Value faux wood blinds combine the natural look and warmth of real wood with durability ease of cleaning and humidity resistance, but at a fraction of the cost. This Classic Value product comes with a standard 2.5" Classic Valance only. Upgrade valances are not available with this product.

Caution due to 12-15-18 federal safe cord act, multiple cords will be attached to this blind with lightmaster options.

IF YOU CHOOSE A CORDED TILT OR LIFT OPTION:
A new safety standard has been taken into effect limiting the manufacturing of corded blinds in response to fears they could injure or kill children and/or pets by strangulation.
Starting December 15 2018, most products must either be cordless or have shorter, inaccessible cords. Cords will be made 1/3 of the ordered height of the blind, but custom length cords can be requested at the time of order. To avoid order questions, if you need longer cords especially for higher windows, please specify the length controls that will work for you in the order comments box.

Priced as low as
$35.75

Based upon a size of 24x36

Levolor Logo Blindsexpress logo
New 2019 Colors and options
   

 Faux Wood
Visions by Levolor
  • Moisture resistant
  • Economical choice
  • Available in 2" and 2-1/2" slat sizes
lightmaster

Lightmaster™

  • Maximum light control.
  • A no rout hole design blocks light and prevents outside 'see through'.
  • Available in Premium Real Wood Blinds, NuWood™, and Visions™.

Multiblinds per Headrail

multiple
  • Provides the flexibility of raising one blind while keeping the other lowered on extra wide windows or patio doors.
  • Two or three blinds on one headrail are available up to a total maximum width of 144".
  • Minimum innerspace is 1/2" between blinds.
  • Horizontal slat alignment not guaranteed.
Valance options
 
Classic Value Valance Option Only
Levolor Classic Valance Option
 
Traditional Valance Option
Tradional Valance for faux wood blinds

Traditional
Available in 2" and 2 1/2"

 
Comtemporary Valance

Contemporary
Available in 2" and 2 1/2"

 
Transitional Valance
Available in 2" and 2 1/2"
Levolor Transitional Valance
 
Tilt
Wand tilet

wand tilt
Put the control in your hands with our optional wand tilt. Not available on 2 1/2" Premium Real Wood Blinds.

-OR-

Cordless with wand tilt

Cordless Levolor Faux Wood
 
Installation Instructions
 
Warranty
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

         
         
         
         

 

stacking chart

Blind Height 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120"
1" Slats 7-3/4" 8-1/2" 9-1/2" 10-1/2" 11-1/4" 12-1/2" 13" 15" 17" 18-1/2" 20-1/4"
2" Slats 6" 6-1/4" 7" 8" 9" 9-1/4" 9-1/2" 10-1/2" 12-1/2" 13-1/2" 15"
2 1/2" Slats 5-1/4" 5-3/4" 6-1/4" 6-3/4" 7-1/4" 7-3/4" 8-1/4" 9-1/4" 10-1/4" 11-1/4" 12-1/4"

Stacking dimensions are approximate and could vary +/- 1".

2" and 2 1/2" Visions™ Wood Inside Mount
Blind Width
Outside Mount
Blind Width
Number of
Ladders and Tapes
Number of
Standard Cords
Number of
LightMaster™ Cords
  10-1/2" - 19-1/2" 10" - 19" 2 2 4
  19-5/8" - 33-1/2" 19-1/8" - 33" 3 2 4
  33-5/8" - 45-1/2" 33-1/8" - 45" 4 4 8
  45-5/8" - 57-1/2" 45-1/8" - 57" 5 3 6
  57-5/8" - 69-1/2" 57-1/8" - 69" 6 4 6
  69-5/8" - 81-1/2" 69-1/8" - 81" 7 4 8
  81-5/8" - 93-1/2" 81-1/8" - 93" 8 4 8

Note difference in number of ladders. Premium Real Wood provides better, uninterrupted view through the window

 

 


Warranty

Walnut 120BR035 View Larger
Light Gray 120GY046 View Larger
Warm White 12067130 View Larger
Pecan 120BR036 View Larger
Sandblasted White 120WH054 View Larger
White 120WH053 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Install Instructions