Graber Lake Forest 2.5 inch Faux Wood

Priced as low as

Based upon a size of 24x36

Graber Standard Lake Forest Faux Wood 2.5 inch are flat Moisture-proof slats that simulate the 2.5 inch wood look. Flat shutter size slat. Good for high humidity, non-warping.

Priced as low as

Based upon a size of 24x36

Lake Forest® 2 1/2'' Faux Wood Blinds

Lake Forest 2 1/2" Faux Wood blinds simulate the look of wood at a fraction of the cost. Their durable construction and moisture-resistant properties make them an ideal choice for kitchens and bathrooms.

  • Affordable alternative to Wood blinds.
  • Moisture-proof slats won't warp.
  • Color-coordinated ladders, cords and tassels.

Cornices & Valances

Classic Valance for Graber Faux wood blinds
Classic Valance

Classic and clean 2 1/2" profile enhances the appearance of your blinds.

Majestic Valance For Graber Faux wood blinds
Majestic Valance

3" decorative wood valance complements many popular molding styles.

Noble Cornice for Graber Faux wood blinds
Noble Cornice

This elegant design is available in 5 1/2" and 7 1/2". Choose stained, painted or Custom Color to achieve your desired look.

Regal cornice for Graber Faux wood blinds
Regal Cornice

This magnificent design is available in 5 1/2" and 7 1/2". Stains and paints coordinate with Graber® Wood blinds or choose Custom Color.

Symphony Cornice for Graber Faux Wood Blinds
Symphony Cornice

Crown your windows with a Symphony Wood Cornice. 4 1/2" profile is available in a wide selection of stained or painted finishes to coordinate with most Graber Wood blinds.

Increased Privacy & Light Control

No holes option for Graber Faux wood blinds
NoHoles™ Privacy Feature

Eliminating rout holes enhance your personal privacy and improve light control.

Operating Systems & Controls

Graber Cord tilt for Graber Faux wood blinds
Standard Cord Tilt

Color-coordinated tilt is standard and engineered for durability.

Wide Windows & Specialty Shapes

Multiple Headrails for Graber Faux wood blinds
Multiple Shades or Blinds on One Headrail

Two or three independently operable blinds can be installed on a single headrail. Ideal for large windows or patio doors.

Corner window for Graber Faux wood blinds
Corner Windows

Butt and Bypass available for corner applications. Blinds operate separately.



Regular Cleaning

  • Lightly vacuum with an upholstery attachment.

Soil Removal

  • Sponge with a mild detergent and warm water solution and blot dry.


Warranty ......Details

White 7035 View Larger
Buttermilk 7078 View Larger
Coconut 7630 View Larger
Coconut Textured 7299 View Larger
Marshmallow 7742 View Larger
Milky Way 7058 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Inside Mount Installation Instructions

Outside Mount Installation Instructions