M&B-Alta-Kathy Ireland 2 inch polymer smooth whites wood blinds

Summary
Colors
Specifications
Reviews
Measure & Install

Click for Larger View

Quality-enhanced functionality and appearance. This material resists warping, cracking, chipping and fading. A decorative 3" wood valance is standard on this blind.

Information:
You can request the LightsOut (Routeless) feature at no additional charge.

View Price Grid

M&B-Alta-Kathy Ireland Blinds

2.5 inch Faux and 2 inch composite

control options

standard cordlock/cord tilt

Slats are lifted and lowered with the pull of a lift cord that features a Break-Thru Safety Tassel to help protect children and pets. Slats are tilted open and closed by pulling tilt cord controls.

wand tilt

You can also opt for a wand tilt control to adjust your blinds open or closed with a simple twist. Only available on 1 3/8" and 2" slat styles.

remotelift motorization

Ideal for hard to reach windows, this battery-operated system tilts slats open and closed with the touch of a button. The wireless system operates within a 65 foot radius, with no line of sight required. Choose a one-channel remote to operate all your blinds at once, or opt for five-channels to operate them individually.

two one one/three on one

Keep large windows looking clean and uniform by putting two or three blinds on one continuous headrail. They look like one blind, but operate independently

decorative options

decorative tape

Available in a variety of patterns and colors, decorative tapes help you add a personal accent to tie your windows in with the rest of your room. And, because they cover route holes, they block additional incoming light.

tape valance

Just like using decorative tape to cover route holes, you can also add tape to the valance at the top of your window and blend it with the rest of your decor.

standard decorative valance

Our decorative valance, standard on all blinds, has a distinctive style that will complement any decor.

optional crescent valance

You can also opt for the sleek, contemporary design of our Crescent valance. It's a great choice for more modern room settings. (Not available on polymer faux woods.)

structure options

routeless

Dramatically reduce light leaks - routeless slats are specially designed without standard route holes, where rays would normally seep through.

standard feature

wedge bottom rail

Our wedge bottom rail adds decorative flair to the bottom of your blinds and allows the slats to close tighter together (not available on polymer faux woods.)

Custom Brands now owns M&B blinds and we are now carying their faux wood blinds see the full specs below:

Check Here Before Ordering Click here for M & B Wood Blinds Specs.

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Install Instructions

Place your mouse over

icons for explanations of options and product selection assistance

Call for a free quote
(800) 836-4488

Custom brands 2.5 inch Faux (Polymer) Smooth Whites Wood Blind

Build Your Blind

Call for a free quote(800) 836-4488

Custom brands 2.5 inch Faux (Polymer) Smooth Whites Wood Blind

Build Your Blind

Call for a free quote
(800) 836-4488