Comfortex Woodwind Faux Wood 2 inch S-Curve Whites and S-Curve Woodtones

Priced as low as

Based upon a size of 24x36

Comfortex Woodwind 2 inch S Curve faux woods are composite slats made from wood chips and pvc. This type of blind is suited for that very heavy humid climate. They are resistant to warping or fading due to their composition.

Priced as low as

Based upon a size of 24x36

scurve prfile

Traditional Styling, Modern Design
Woodwinds S-Curve Wood Alloy Blinds combine the traditional warmth and feel of real wood with advanced engineering technology to provide a lifetime of beauty, performance, and extraordinary value.  

The end result:a wood alloy blind with an array of styles and colors that will coordinate perfectly with any home.


Hardware Options & Designer Accents
You can choose from a variety of Hardware and Decorative Options, including:

Standard Rectangular
Two on One and Three on One Head Rails
Routed or Routeless "no-holes" options
Crown Valance
Trapezoidal bottom rail
Decorative tapes (click to define)


Made with Exclusive Patented Technology
Made from a combination of American Hardwood and engineered thermal polymers that are guaranteed to last a lifetime. You'll benefit from:

  • Performance and extraordinary value: will resist warping, cracking, chipping and fading
  • Easy Cleaning: feature an anti-static, polymer finish that actually repels dust and dirt
  • Choose from a variety of whites, off-whites, and wood tones that capture wood's traditional beauty

Limited Lifetime Warranty
Our commitment to your satisfaction! Click here for full warranty details.

Complete Comfortex Faux wood specs>>>> Click here for Comfortex Woodwind Faux wood Specs.

8000 Oboe S Curve View Larger
8005 Cornetta S Curve View Larger
8010 Bassoon S Curve View Larger
8020 Ocarina S Curve View Larger
8030 Pan Pipe S Curve View Larger
8050 Flute S Curve View Larger
9020F Pecan S Curve View Larger
9025F Mahogany S Curve View Larger
9035F Mission Oak S Curve View Larger
9040F Rich Mahogany S Curve View Larger
9050F Cinnamon Stick S Curve View Larger
9060F Deep Cherry S Curve View Larger
9000F Natural S Curve View Larger
9010 Maple S Curve View Larger
9005F Oak S Curve View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Inside Mount Installation Instructions

Outside Mount Installation Instructions