*NEW Colors Our Brand COM Advanced Premium 2.5 Inch Faux Woods corded and cordless options

Priced as low as

Based upon a size of 24x36

Blindsexpress Advanced Premium 2.5 Inch Polymer Faux Woods can be made with standard slat, routeless or with Designer Tape. This product is a durable composite made from the highest quality polymers. This product is easy to clean and maintain. This 2 i/2 inch slat blind combines the traditional warmth and feel of real wood with advanced engineering technology to provide a lifetime of beauty, performance, and extraordinary value. The end result:a wood alloy blind with an array of styles and colors that will coordinate perfectly with any home.

Priced as low as

Based upon a size of 24x36

Performance and extraordinary value: will resist warping, cracking, chipping and fading. NEW- Now available with push button cordless with wand tilt. Cordless not available with route-less option or cloth tapes.

Blindsexpress Brand Advanced Faux woods
Advance faux woods
Faux woods by blindsexpress
Specifications fauc woods
Advance faux wood warranty


2201 White View Larger
2202 Snow White View Larger
2203 Linen View Larger
2204 Cream View Larger
2205 Antique View Larger
2206 Natural View Larger
2207 Textured Bright White View Larger
2300 Oak View Larger
2301 Maple View Larger
2302 Teak View Larger
2303 Rich Oak View Larger
2304 Colonial Cherry View Larger
2305 Pecan View Larger
2306 Dark Walnut View Larger
2200 Polar White View Larger
2307 Honey View Larger
2308 Lt Cherry View Larger
2211 Modern Gray View Larger
2210 Misty View Larger
2209 Almond View Larger
2208 Textured Linen View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Inside Mount Installation Instructions

Outside Mount Installation Instructions