Our Brand WD 2 inch Faux wood Trends Fine Simulated Wood

2" faux wood blinds are made of composite material. The slats are smooth with a wood stained look. These blinds are warranted to keep their color and prevent warping for as long as our customers own their blind. The working materials for this blind tilt control and lift controls are warranted for existing customer. Cording is warranted for a period of three years, after one year the customer is responsible for shipping to manufacturer for cording replacement.

Change the size below to see your price

$32.98

Note: This product comes with the Crown valance free of charge standard. No other valance is available on this product at this time.

 

Synthetic Wood Blinds
2” Slats

Synthetic Blinds are heavier and less rigid than wood blinds. Synthetic wood slats, bottomrails, and valances can be as much as 80% heavier than basswood.

2" Synthtic Blinds are Flame Retardant. Made from 100% PVC with UV Protection.

General Specification Information – Applies to all synthetic wood product lines

  • Slats, valance, bottomrail, cord tassels, and plugs are color coordinated to match.
  • Minimum width for single blind is 8” net width.  Blinds made with a net width less than 9.5" are subject to a $15 surcharge and are not covered by our warranty.
  • Maximum width for single blind is 96” net width. Consult your price list for warranty specifications on larger blinds. Single blinds in the area right of the double line are not covered by warranty.
  • 2” x 2” Standard Headrail.
  • Mounting hardware is included. Mounting brackets are hinged, open boxes that can mount from the side, top or back of the window. Hold downs, spacer blocks and extensions brackets are included upon request.
  • Inside mount blinds – headrail and slats made 0.5” smaller than width ordered.
  • Outside mount blinds – headrail and slats made to exact width ordered.
  • Standard IB valance is 0.375” larger than the headrail or 0.125” less than the ordered width.
  • Standard OB valance size varies by product. See specific product information listed below. All valance measurements will be the widest point on the face of the valance.
  • Wand tilter is a clutch-type, dies-cast helical gear driven by a one piece die-cast worm gear in a polymer housing. Only available on blinds up to 30 sq. ft.
  • Cord tilter is a drum type, helical gear driven by a worm enclosed casing.
  • Wands are color coordinated to match slats up to 60”. Clear lucite wands are available in 54” and 72” upon request. PVC wands are included with all white blinds.
  • Tapes drums are heavy duty nylon plastic.
  • Tilt rod is solid steel with a corrosion-resistant finish.
  • Lift Cord is polyester. Ladder, tapes, and cord designed to meet or exceed commercial item specification No. 1029-86.
  • Cord and End Lock is steel with zinc coating.

  “B”/ WINDSONG  and Trends™ Blinds

  • Flame Retardant – 100% PVC with UV Protection. “B” and Trends™ are smooth. Windsong is textured.
  •  “B”/ WINDSONG and Trends™ Blinds are approximately 80% heavier than Basswood Blinds. The slats are very flexible and require additional support with closer ladder spacing and shorter end-routes.
  • Available with wand or cord tilter. Wand tilters are only available on blinds up to 30 sq. ft.
  • 3” Sculpted Valance on  “B”/ WINDSONG Blinds at no extra charge.  3.25" Sculpted Valance on Trends™ Blinds.
  •  “B”/ WINDSONG Blinds have a rectangular bottomrail.  Trends™ Blinds have a trapezoid bottomrail.
  • The face of a standard OB valance will be 2” larger than the headrail width on  "B"/ WINDSONG . Returns will be 3.125” and mitre-cut. All valance measurements are from the widest point on the face of the valance.
  • The face of a standard OB valance will be 1.5” larger than the headrail width on  Trends™ . Returns will be 3.125” and mitre-cut. All valance measurements are from the widest point on the face of the valance.
  • Available with 34 colors of Decorative Cloth Tape – 20% surcharge for Standard Twill Cloth Tape Colors; 25% surcharge for Deluxe Decorative Cloth Tape Colors. Blinds will be entered with normal string ladders unless otherwise specified. We do not recommend that Decorative Cloth Tape be used on this product.
  • Available with Routeless Construction. Standard Headrail only. See your price chart for surcharge.
  • RollEase Continuous Cord Lift System is not available.
  • Available with a Battery-Operated Tilt System up to 28 sq. ft. Low Profile Headrail only. See your price chart for surcharge.

 

String Ladder Chart
KingWood Series "B",  Windsong & Trends
Net Blind Size End Route
Positions
Controls # of Ladders  # of Cords (Routes)
8" - 13.375" 3" Center Tilt, no Lift 2 2
13.5" - 15" 3.5" Opposite Side only 2 2
15.125" - 20" 4.5" Opposite Side only 2 2
20.125" - 22" 5.5" L/R, R/L, L/L, R/R 2 2
22.125 - 33" 5.5" L/R, R/L, L/L, R/R 3 2
33.125" - 44" 5.5" L/R, R/L, L/L, R/R 4 2
44.125" - 55" 5.5" L/R, R/L, L/L, R/R 5 4
55.125" - 66" 5.5" L/R, R/L, L/L, R/R 6 4
66.125" - 77" 5.5" L/R, R/L, L/L, R/R 7 4
77.125" - 88" 5.5" L/R, R/L, L/L, R/R 8 4
88.125" - 96" 5.5" L/R, R/L, L/L, R/R 9 4
Maximum space between ladders is 11"      

 

Color Coordination Chart -
KingWood, WINDSONG, & Trends

Slats Headrail Ladder & Cord Wands, Tassels & Plugs
4110 Snow White 205 White Satin 100 White 101 Pure White
4111 Pearl White 205 White Satin 100 White 103 Antique White
4112 White 112 Alabaster 107 Alabaster 105 Alabaster
4113 Oyster White 112 Alabaster 107 Alabaster 105 Alabaster
4310 Windsong Snow 205 White Satin 100 White 101 Pure White
4311 Windsong Pearl 205 White Satin 100 White 103 Antique White
4312 Windsong Brite 205 White Satin 100 White 101 Pure White
4313 Windsong Oyster 112 Alabaster 107 Alabaster 105 Alabaster
4321 Windsong Pecan 062 Charcoal Brown 320 Camel 111 Pecan
4322 Windsong Cherry 062 Charcoal Brown 529 Apricot 112 Cherry 
4325 Windsong Natural 031 Fawn 333 Oak 108 Light Oak
4327 Windsong Birch 031 Fawn 320 Camel 107 Natural
4329 Windsong Maple 062 Charcoal Brown 320 Camel 111 Pecan
4250 Trends Bamboo 031 Fawn 320 Camel 107 Natural
4251 Trends Natural 031 Fawn 320 Camel 107 Natural
4252 Trends Maple 031 Fawn 333 Oak 109 Sugar Maple
4253 Trends Pecan 062 Charcoal Brown 259 Apricot 108 Light Oak
4254 Trends Oak 062 Charcoal Brown 259 Apricot 110 Golden Oak
4256 Trends Chestnut 062 Charcoal Brown 370 Cocoa 113 Walnut
4257 TrendsMahogany 062 Charcoal Brown 370 Cocoa 117 Mahogany
Routeless, Rollease, and Motorized blinds may have different colors for Ladders & Cords.

 

 

 

Check Here Before Ordering!!!! Click here for Specifications

Mahogany 4257 View Larger
Chestnut 4256 View Larger
Oak 4254 View Larger
Pecan 4253 View Larger
Maple 4252 View Larger
Natural 4251 View Larger
Bamboo 4250 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructions>>>>Installation with Reg clips.....Installation with Magnet Valance