Our Brand VIS Cordless or Motorized 2 inch Southeast wood blinds Whites

Priced as low as
$48.00

Based upon a size of 24x36

Crafted from finely grained basswood, our elegant wood blinds bring the warm beauty of nature into your home. These durable yet lightweight blinds are as functional as they are beautiful. Available in several painted colors wood blinds complement most styles of furniture and d├ęcor. Wood blinds are available in 2? slat sizes to fit all your window needs. This faux wood is cordless only.

Priced as low as
$48.00

Based upon a size of 24x36

Note: This product comes with the Crown valance free of charge standard. No other valance is available on this product at this time.

New Southwest 2 inch and 2.5 wood slat blinds
   

southeast real wood blind
   
Cordless Feature
Cordless Features
   

Lift and lock cordless for Faux woods
   
Crown Valance Standard

Crown valance for faux woods
     
Shipping times approx 5 days out of factory from Florida.
   

 

904 Casa Blanca View Larger
902 Polar White View Larger
900 Slate View Larger
156 Sand View Larger
148 Vanilla View Larger
107 Snowdrift View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructions>>>>Installation with Reg clips.....Installation with Magnet Valance