Comfortex Woodwind Faux Wood 2.5 inch Plantation Blind White and Fine Woodtones

Priced as low as

Based upon a size of 24x36

Comfortex Woodwind 2.5 inch Plantation Blind (elliptical slat) available standard ladderbraid, or routeless.

Priced as low as

Based upon a size of 24x36

Comfortex offers a  Plantation like slat for thei 2.5 inch Faux wood.


Contemporary Look, Dimensional Appeal
With an intriguing, multi-faceted profile, Woodwinds Beveled Profile Wood Alloy Blinds offer an exceptionally wide view-through that welcomes the beauty of the outdoors into your home.

The end result: clean, contemporary lines and enhanced view-through for a blind with style, performance, and closure beyond the ordinary.

Plantation's Clear Views and Complete Privacy
Plantation Shutter Blinds 2 1/2" shutter louvers combine the elegance of a plantation shutter with the ease and function of a blind.

These specially designed louvers provides a clearer "view- through" with minimal distraction, and a tight slat closure to ensure the ultimate in control of light and privacy.


1000 Oboe View Larger
1005 Cornetta View Larger
1010 Bassoon View Larger
1020 Ocarina View Larger
1050 Flute View Larger
1500F Natural View Larger
1505F Oak View Larger
1510F Maple View Larger
1535F Mission Oak View Larger
1560F Deep Cherry View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Inside Mount Installation Instructions

Outside Mount Installation Instructions