Our Brand Com Budget (BAL) Skylight Light Filtering Fabric 3/8 Double Cell

Priced as low as
$131.00

Based upon a size of 24x36

Our Brand shades look great from any angle. Mounted on a unique track system, These shades can be used vertically, horizontally and even on angles (like skylights) for maximum versatility. These shades are energy-efficient, and insulation is enhanced by the side rail that forms a barrier around the edge of the shades. These shades are child safe with no exposed cords.

Priced as low as
$131.00

Based upon a size of 24x36

Our Brand cellular shades

Inside Mount Only
Use a steel tape to measure the opening at three different places, and use the narrowest dimension when ordering. Be exact! The factory will make the shade narrower so that it will not rub against the window casing. Measure the height of the window from the top (Soffit) down to the sill.

 

  • Balcony Shades are for inside applications only.
  • Minimum required for installation: 1 1/4 inches
  • Minimum flush Inside mounting surface: 2 1/4 inches
This shade can be used in horizontal and angled applications 0 to 75 degrees: Angle
Minimum Width 15 inches Maximum Width 36 inches
Minimum Length 12 inches Maximum Length 96 inches
Total shade area must not exceed 24 square feet
  • The widest width of the window cannot exceed the narrowest width of the window by more than 3/8 inch.

 

Balcony Vertical Applications
This shade can also be used in vertical applications 75 to 90 degrees: Angle
Minimum Width 15 inches Maximum Width 48 inches
Minimum Length 12 inches Maximum Length 96 inches
  • Total shades area must not exceed 18 square feet
Vertical
  • Balcony shades can be mounted
    on their side. Use the vertical
    measurement as your width (max. 36")
    and the horizontal measurement as
    your length. (max. 48")
Angled Applications 15 to 75 degrees: Angle
Minimum Width 15 inches Maximum Width 36 inches
Minimum Length 12 inches Maximum Length 96 inches
  • Total shades area must not exceed 24 square feet

 

6029 Mustard View Larger
6036 Rich Coffee View Larger
6019 Brown View Larger
6000 Pearl View Larger
6001 Putty View Larger
6004 Cinnamon View Larger
6005 Snowflake View Larger
6006 Gardenia View Larger
6008 Bone White View Larger
6016 Coffee View Larger
6017 Almond View Larger
6018 Light Beige View Larger
6076 Muslin View Larger
6023 Taupe View Larger
6024 Cottonwood View Larger
6031 Moonlight Grey View Larger
6032 Light Grey View Larger
6033 Grey Sky View Larger
6047 Light Green View Larger
6057 Navy View Larger
6081 Grey Tan View Larger
6082 Grey View Larger
6002 Khaki View Larger
6037 Gold View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Skylight Soprano Specialty Shades-Inside Mount Only

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

 

Installation Instructions