Norman Smart Privacy Cordless 2 inch Faux Wood Blinds

Priced as low as

Based upon a size of 24x36

Norman Cordless Faux Wood blinds offer traditional elegance of faux wood blinds with a proven operating system. This 2 inch faux wood comes with a unique "stay put" smart privacy route-less slat at no additional charge. The standard PolyDeco headrail is a one-piece integrated rail that comes with built-in light block for extra light protection. This product does not come with a standard valance but optional MODERN AND DESIGNER VALANCES are available for an upcharge. Tilt wand is always on the left side.


A new safety standard has been taken into effect limiting the manufacturing of corded blinds in response to fears they could injure or kill children and/or pets by strangulation.
Starting December 15 2018, most products must either be cordless or have shorter, inaccessible cords. Cords will be made 1/3 of the ordered height of the blind, but custom length cords can be requested at the time of order. To avoid order questions, if you need longer cords especially for higher windows, please specify the length controls that will work for you in the order comments box.

Priced as low as

Based upon a size of 24x36


Valance for Eteck Norman blinds  
Features & Options
Decorative, valance free, PVC headrail
Engineered trapezoid bottomrail
Wand Tilt left
Norman eteck specs
Norman restrictions for Eteck  

Optional Valances For Upcharge

Modern valance for Norman faux wood blinds Modern Curved Valances  
Designer Crown valance for Norman Designer Crown Valances  
Norman Charges Shipping on all their products.  
Cordless Standard - Smart Privacy Standard  


Sea Mist Embossed P032 View Larger
Storm Gray Embossed P075 View Larger
Crisp Linen Embossed P012 View Larger
Designer White E008 View Larger
Pearl P006 View Larger
Bright White P004 View Larger
Silk White P003 View Larger
Pure White Embossed P001 View Larger
Pure White Smooth P001 View Larger
Taupe Gray Embossed P080 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to allow for brackets and correct installation.

•   When ordering inside mount be sure you have 3 inchs of depth for your brackets. If you don't order inside mount with returns. That  is you measure your depth and subtract it from 3 inches and order retruns to cover your hardware.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructions