Norman Roller Shade style Cambria Room darkening

Priced as low as
45.0

Based upon a size of 24x36

*Norman has started to charge shipping
Norman now introduces a complete line of roller shades. This Cambria is a foam backed room darkening fabric. The latest blackout fabrics; select fabrics are FR and GREENGUARD certified./br> Includes safer lift systems including our cordless option designated WCMA ?Best for Kids? plus motorized systems.

Special Caution!!!! Outside mount blinds and shades are installed outside the window casing, covering an area larger than the window itself. 1. Measure the exact width to be covered. Be sure the measurement overlaps the window opening by at least 1 1/2" on each side (3" total overlap) to ensure light control and privacy. * For Solar or Roller Shades make sure the measurement overlaps the window opening by at least 1.5" on each side (3" total overlap) to ensure light control and privacy.

Priced as low as
45.0

Based upon a size of 24x36

Blindsexpress.com
Presents Norman Roller-Solar Shades  
 

Norman Roller-solar shades
   
Railroading
Fabrics can be turned
90
ͦ
clockwise (width for height) to accommodate wider windows.
Railroaded fabrics may curl along the edge. This is considered normal and is not a product
defect. Railroading may be required when the fabric width and height are not long enough due
to standard fabric deductions, allowances for fabric to be attached to the roller tube, etc. For
shade orders with distinct patterns, multiple shades may need to be railroaded to maintain
consistency.
Recommendations
Due to variations in fabric and dye lots, colors or sheens may vary slightly. It is highly
recommend that all shades for the same room be ordered at the same time and with the same
orientation to ensure a consistent look.
Opacity and Light Control
Sheer: Provides an atmospheric touch with significant view
-
through while softening the outside
view. Objects in the room can be seen clearly through sheer shades. Privacy level: Minimal
Light Filtering: Offers a wide range of light diffusion from bright to dim. Shapes or outlines may
be seen through these shades but details are not visible. Privacy level: Medium
Room Darkening: Blocks a significant amount of incoming light and provides maximum privacy.
A perfect choice for rooms where blackout and privacy control is a must. Privacy level: High
 
   
Complete Spec Guide Click Here!  
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

 

F0849 Snow White View Larger
F0850 Ivory View Larger
F0852 Jet View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measuring for Roller Shades

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will make the correct deduction from the total width to allow for brackets and correct installation.  Roller shades have generally large deductions due to the nature of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally-         1 1/8" or more from ordered width on inside mount .

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 2" on each side to ensure light control and privacy.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructions-Chain Operated

Installation Instructions-Spring/Cordless

Installation Instructions-Cassette Headrail

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measuring for Roller Shades

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will make the correct deduction from the total width to allow for brackets and correct installation.  Roller shades have generally large deductions due to the nature of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally-         1 1/8" or more from ordered width on inside mount .

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 2" on each side to ensure light control and privacy.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructions-Chain Operated

Installation Instructions-Spring/Cordless

Installation Instructions-Cassette Headrail