Northern Heights 2 3/8 inch wood Painted and Stained

Bali Northern Heights 2 3/8" inch wood blind with their natural beauty and energy efficiency. The more traditional 1 inch slat size offer design flexibility, a wide selection of beautiful stains and paint and many decorative options.

This small size allows for that hand to install place for a wood blind.

This collection also contains the new wider more visibility between slat size 2 3/8 inch woods.

the unique 2 3/8 size is new for Bali for that large visibility between slats.

Product Specials:
5% Bali products with COUPON code 4205. (Expires May 31, 2013)

View Price Grid

Bali Blinds 1 inch Real Wood:

1" Northern Heights™ Wood Blinds
Ideal for smaller windows or windows with limited depth

Superior quality, superior craftsmanship.

The natural warmth of Bali Wood blinds instantly transform any room into an inviting sanctuary. 

• Northern Heights paints and stains are crafted from 100% North American hardwoods
• Seamlessly blend with your existing wood finishes - flooring, cabinets, furniture, etc.
• Wide selection of colors, stains and textures

Color-coordinated wood wand is attached to the headrail. Rotate left or right to tilt the blinds and adjust the privacy and light level in the room.

Standard Valance

Attractive 2 1/2" wood valance features a clean, simple profile. Standard valance makes a great finishing touch for Wood and Faux Wood Blinds alike.

 

 

Bali blinds puts all of their specifications in an adobe pdf file that is small and easy to download. Click here for Bali Wood Blind Specifications

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
Graphic Measure Instructions

Installation Instructions   InsideMT.........Outside MT.