Comfortex sliding panel style Phifer Sheer Weave 5000 is 10% open 72% vinyl on polyester 28% Polyester. This is one of the famous Phifer Solar fabrics that is 10% open to light and UV protection. This is one of Phifer's newer intros that is a heavier open weave. This is light filtering and semi-private.All Comfortex Sliding Panel Tracks come with a sleek small profile top rail to compliment fabric color.
Based upon a size of 24x36
Note: Manufacturer takes approx. -1/2" deduction off headrail and product for products ordered as Inside Mount.
Comfortex Panel Track System
Large windows or patio doors? No problem! The Comfortex Panel Track sliding fabric system is a perfect solution with fashion and function in mind.
The Comfortex Panel Track System is available with all Envision Roller Shade fabrics. Achieve a coordinated look with a panel track system along with roller or roman shades throughout a room with windows of all sizes! Panel Track Shades can function as room dividers too!
Sliding Panel Design
Upgrade to a Panel Track Valance
Choose wand or cord control for use of traversing the fabric panels.
Easy to Coordinate Window Sizes
Achieve a coordinated look with roller or roman shades and a panel track system throughout a room with windows of all sizes!
Classic Details for Today's Windows
Fabric wrapped bottom rail add a finishing touch.
Limited Lifetime WarrantyOur commitment to your satisfaction! Click here for full warranty details.
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measure For Panel Track Blinds
Measure Depth: See chart on next page to determine if window casing has enough depth for an inside-mount window treatment.
Measure Width: Measure the inside width of window casing in three places. Record narrowest measurement.
Measure Height: Measure the inside height from the top of window casing to top of sill (or to the floor for patio doors) in three places.
Record shortest measurement.
Note: Do not take any deductions for clearance. The manufacturer will take necessary deductions for a perfect fit.
Manufacturer will deduct .5 inches from width and height.
Record measurement. If you want the entire window uncovered when the shade is fully open, you will need to add more than 3" to the width.
Determine Headrail Location: Determine headrail mounting position and mark the spot.
Measure Height: Measure height to be covered from top of headrail location to bottom edge or top of sill if there is one. Record measurement.
Allow 3" for adequate mounting area above the window. If shade extends to the floor (i.e. to cover a patio door), measure height from the headrail
to the floor, and deduct ½" for Roller, Solar and Roman Shade fabrics, or 1" for Natural Shade materials in order for the panels to clear the floor.
Note: The manufacturer makes NO deductions on outside-mount installations.