Comfortex Sliding Panels Roller shade material Style Classic Duplex

Comfortex sliding panel style Classic Duplex is Vinyl coated Fiberglass. This is the "old fashion roller shade look' from the past except Comfortex offers a room side color and an outside out white on the back for more color options. This is room darkening.

Product Specials:
25% off Comfortex Blinds!Use Coupon Code 2010. (Expires May 31, 2013)

Information:
Critical info:
Inside Mount manufacturers will take .3/8 deduction from width and length-natural material without valance 1 inch, with valance - 1.375, with projection brkts 1.375, Roller,Solar and roman material without val. -.5, with valance 5/8. with projections 7/8. Outside Mount manufacturers will not deduct.

View Price Grid

Comfortex Panel Track System

Large windows or patio doors? No problem! The Comfortex Panel Track sliding fabric system is a perfect solution with fashion and function in mind. The Comfortex Panel Track System is available with all Envision Roller Shade fabrics. Achieve a coordinated look with a panel track system along with roller or roman shades throughout a room with windows of all sizes! Panel Track Shades can function as room dividers too!
	Sliding Panel Design  The Comfortex Panel Track System provides an easy solution for covering large windows and doors. Upgrade to a Panel Track Valance with a matching fabric insert to conceal the operating system. Wand or Cord Control Choose wand or cord control for use of traversing the fabric panels.
	Easy to Coordinate Window Sizes Achieve a coordinated look with roller or roman shades and a panel track system throughout a room with windows of all sizes!
	Classic Details for Today's Windows Fabric wrapped bottom rail add a finishing touch.
Limited Lifetime Warranty Our commitment to your satisfaction! Click here for full warranty details.

 

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Panel Track Blinds

Measure Depth: See chart on next page to determine if window casing has enough depth for an inside-mount window treatment.

Inside Mount:
Measure Width: Measure the inside width of window casing in three places. Record narrowest measurement.
Measure Height: Measure the inside height from the top of window casing to top of sill (or to the floor for patio doors) in three places.
Record shortest measurement.
Note: Do not take any deductions for clearance. The manufacturer will take necessary deductions for a perfect fit.
Measure Width: Measure width to be covered. We recommend 3" overlap on each side (6" total) for optimum light control and privacy.
Manufacturer will deduct .5 inches from width and height.

Outside Mount

Record measurement. If you want the entire window uncovered when the shade is fully open, you will need to add more than 3" to the width.
Determine Headrail Location: Determine headrail mounting position and mark the spot.
Measure Height: Measure height to be covered from top of headrail location to bottom edge or top of sill if there is one. Record measurement.
Allow 3" for adequate mounting area above the window. If shade extends to the floor (i.e. to cover a patio door), measure height from the headrail
to the floor, and deduct ½" for Roller, Solar and Roman Shade fabrics, or 1" for Natural Shade materials in order for the panels to clear the floor.
Note: The manufacturer makes NO deductions on outside-mount installations.

Installation Instructions-Click Here