Comfortex Envision Roman Shade Phifer SheerWeave 5000 3-10% Open Flat Panel

Comfortex Envision Phifer 5000 provides 3% to 10% openness factor for light reduction depending on which of the 5000 series you choose. To be sure you are choosing the correct openness factor, we suggest asking for free swatches.

Change the size below to see your price

$95.55

Fabric Roman shade in Flat Panel design comes STANDARD WITH CORD LOOP OPERATING SYSTEM.

Comfortex Envision Roman Shades
Envision Roman Shades combine the beauty of drapery fabrics with the benefit of window treatment technology.

Shade Styles
Choose from the contemporary look of the Flat Panel design or the the elegant folds of the Classic Tear Drop style:
Roman Flat Roman Tear

Hardware Options & Operating Systems
You can choose from a variety of Hardware Options, including:

Overtones Bottom Rail

Standard Rectangular

Top Down - Bottom Up (Duofold)
Cordless
Cordless Top Down - Bottom Up
Continuous Cord Loop
Two on One Head Rail (Classic Tear Drop only)

Motorization

Designer Metallic Hardware Options
Further customize your Envision Roman Shades with Oil Rubbed Bronze or Brushed Nickel hardware.

Designer Hardware Options are available Standard Pull Cord, Top Down-Bottom Up, Continuous Cord Loop and Cordless.

Overtones Open Position Overtones Closed Position Overtones Closed Position Overtones Closed Position

Limited Lifetime Warranty
All Envision Roman Shades are covered by the Comfortex Limited Lifetime Warranty as a commitment to your satisfaction.

Check Here Before Ordering!!!! Click here for Roman Shade Specifications

Linen Cranberry 5000R11 (3%) View Larger
Linen Fig 5000V88 (3%) View Larger
Linen Cream 5000U12 (3%) View Larger
Tweed Oatmeal 5000Q94 (5%) View Larger
Tweed Buckeye 5000Q95 (5%) View Larger
Bamboo Wheat 5000Q46 (7%) View Larger
Bamboo Birch 5000P60 (10%) View Larger
Crepe Blackened Bronze 5000V89 (10%) View Larger
Crepe Chestnut 5000V90 (10%) View Larger
Crepe Walnut 5000U14(10%) View Larger
Seaglass Crystal 5000U29 (10%) View Larger
Seaglass Silver 5000U24 (10%) View Larger
Seaglass Chardoney 5000U28 (10%) View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Roman Shades

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•    French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.
 

Installation Instructions