Critical info: Inside Mount manufacturers will take .3/8 deduction from width and length-natural material without valance 1 inch, with valance - 1.375, with projection brkts 1.375, Roller,Solar and roman material without val. -.5, with valance 5/8. with projections 7/8. Outside Mount manufacturers will not deduct. Wooden cornices are now available on this product.
Sliding Panels provide coordinated coverings for wide windows, patio doors or room dividers using Roller Shade, Solar Shade, A redesigned, rust-resistant aluminum track system lets you choose the number of tracks based on the needs of your space, automatically sizing the panels (narrower or wider) based on the selection. The new design also features the leading panel in the front and the stationary panel in the back for easier opening and better clearance of window obstructions.
Durable plastic wand smoothly opens and closes Sliding Panels. Available with Spliced Blinds.
Note: The design now features the leading panel to be in the front position and the stationary panel in the back position for easier opening and better clearance of window obstructions.
Reliable cord control makes opening and closing Sliding Panels absolutely effortless. Cord control is not available with Spliced Blinds.
Spliced blinds are an excellent option for homes or apartments where narrow hallways, stairwells or elevators make it difficult to move wide shades. Available on 4 and 5 track headrails and with wand control only. Additional cost, except for shades over 192", first splice is no charge.
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measure For Panel Track Blinds
Measure Depth: See chart on next page to determine if window casing has enough depth for an inside-mount window treatment.
Measure Width: Measure the inside width of window casing in three places. Record narrowest measurement.
Measure Height: Measure the inside height from the top of window casing to top of sill (or to the floor for patio doors) in three places.
Record shortest measurement.
Note: Do not take any deductions for clearance. The manufacturer will take necessary deductions for a perfect fit.
Manufacturer will deduct .5 inches from width and height.
Record measurement. If you want the entire window uncovered when the shade is fully open, you will need to add more than 3" to the width.
Determine Headrail Location: Determine headrail mounting position and mark the spot.
Measure Height: Measure height to be covered from top of headrail location to bottom edge or top of sill if there is one. Record measurement.
Allow 3" for adequate mounting area above the window. If shade extends to the floor (i.e. to cover a patio door), measure height from the headrail
to the floor, and deduct ½" for Roller, Solar and Roman Shade fabrics, or 1" for Natural Shade materials in order for the panels to clear the floor.
Note: The manufacturer makes NO deductions on outside-mount installations.
Comprehensive Measuring instruction ......Details