Our Brand Super Value Mirage P2 Cordless Cellular Room Dimming

Priced as low as
54.0

Based upon a size of 24x36

Our Brand Cordless Cellular Blind is a cordless cellular shade in the most common colors ordered in the industry. Smooth cordless operation is the trademark of these budget cells.Quick ship is normally 2-4 business days in house. These are Room Dimming not black out shades.

Priced as low as
54.0

Based upon a size of 24x36

This product won the Window Covering Manufactures Award for best Technical innovation.

Please call for specs on this product. 1-800-836-4488

Amber Room DK View Larger
Dove Grey Room DK View Larger
Espresso Room DK View Larger
Ivory Room DK View Larger
Storm Room DK View Larger
Tussah Room DK View Larger
Vanilla Room DK View Larger
White Room DK View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Cellular Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•    French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.
 

Installation Instruction