Our Brand Roller Shades Style 5000 is designed with privacy in mind and offers maximum UV blockage.Material Composition - App. 24% Polyester, 76% Vinyl on Polyester. With a broad range of decorator colors and the look and feel of rich cloth. Style 5000 will enhance the beauty and function of any room. There is no thermal protection given by this shade.
Dense sheer solar sheer product.Opacity(varies openness) FABRIC WILL BE ROTATED 1/4 TURN TO MAKE YOUR BLIND WIDER THAN 96 INCHES.
Clutch Solar Roller Shades
Manufactured Using Only the Best:
Phifer Fabrics and RollEase Hardware Systems
Ez lift Series Clutch Systems
5 of the Most Popular Series of SheerWeave Fabrics from Phifer, Inc.:
Series 2390 / 2360 / 2410 / 2500
Series 4000 / 4100 / 4400
Extensive Solar Roller Shade Specifications
Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.
Measuring for Roller Shades
Inside Mount Width
• Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
• Take the smallest of the three measurements to the nearest 1/8 of an inch.
• The factory will make the correct deduction from the total width to allow for brackets and correct installation. Roller shades have generally large deductions due to the nature of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally- 1 1/8" or more from ordered width on inside mount .
Inside Mount Height
• Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
• Take the largest of the three measurements.
Outside Mount Width
• Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
• For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 2" on each side to ensure light control and privacy.
Outside Mount Height
• Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
• Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.