*Our Brand VIS Solar Roller Shades Style 7000 Phifer BLACKOUT

Priced as low as

Based upon a size of 24x36

Our Brand Roller Shades Style 7000 is a woven from 100% polyester with an acrylic foamed backing (PVC-free). It is uniquely designed to provide total light blockage when complete room darkening is needed. With a broad range of decorator colors and the look and feel of rich cloth. Style 7000 will enhance the beauty and function of any room. There is no thermal protection given by this shade.

Priced as low as

Based upon a size of 24x36



Clutch Solar Roller Shades


Manufactured Using Only the Best:

Phifer Fabrics and RollEase Hardware Systems

Ez lift Series Clutch Systems
R120 Cassette System

5 of the Most Popular Series of SheerWeave Fabrics from Phifer, Inc.:

Series 2390 / 2360 / 2410 / 2500

Series 3000

Series 4000 / 4100 / 4400

Series 5000

Series 7000

Extensive Solar Roller Shade Specifications

P62 White 7000 View Larger
P63 Birch 7000 View Larger
P64 Sand 7000 View Larger
Q57 Wheat 7000 View Larger
Q58 Mushroom 7000 View Larger
V39 Graphite 7000 View Larger
V41 Canyon 7000 View Larger
U67-Canvas-7000 View Larger
U69-Cocoa-7000 View Larger
V40-Onyx-7000 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measuring for Roller Shades

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will make the correct deduction from the total width to allow for brackets and correct installation.  Roller shades have generally large deductions due to the nature of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally-         1 1/8" or more from ordered width on inside mount .

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 2" on each side to ensure light control and privacy.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructions